Koozali.org formerly Contribs.org

Legacy Forums => Experienced User Forum => Topic started by: ivankr on July 16, 2002, 03:53:58 PM

Title: "esmith" and "esmith-up" what is it?
Post by: ivankr on July 16, 2002, 03:53:58 PM
What is the difference between "esmit" and "esmith-up"? Is it normal if when i choose "esmith", there is a messge:
checking filesistem:
hda lost interrupt
and when i choose "esmith-up" - the srver loads and works ?
Title: Re: "esmith" and "esmith-up" what is it?
Post by: Gary Parker on July 16, 2002, 07:33:03 PM
You should only see the option of these two kernel types if you're running on a multiprocessor system. esmith is the default, SMP enabled, kernel for these systems and esmith-up is a fall-back, Uni-Processor, kernel for if you have trouble running the SMP kernel.

Having said that, some people have noted that some recent P4 motherboards have been incorrectly identified as being SMP capable by the installer and get the SMP install. It's a simple matter of editing /etc/lilo.conf and re-running lilo with the uni-processor kernel as the default. You may also see this situation if you have an SMP capable system that only has one CPU installed.

Gary
Title: Re: "esmith" and "esmith-up" what is it?
Post by: ivankr on July 19, 2002, 04:20:31 PM
Many thanks, Gary!!!
I really have P4 motherboard, so i just delited smp kernel loading from lilo and the system works properly.
By the way: could you tell me how to use driver disk (from the drivers.img) to install necessary RAID driver? :)