Koozali.org: home of the SME Server

3com 3c905b

Mr.Cat

3com 3c905b
« on: August 07, 2000, 08:12:13 PM »
Hi i got a 3com 10/100 TX 3c905b and e-smith finds it.
But i get network is unreachable.
I have tried and tried but no luck.

One netcard. And for intranet

Orville Carter

RE: 3com 3c905b
« Reply #1 on: August 09, 2000, 02:00:41 AM »
Mr Cat,

Two questions: Have you assigned an IP address to the network card, & can you "ping" the IP from the e-smith (from itself) or other pc's on the network??

eg; # ping xxx.xxx.xxx.xxx

OC

Mr.Cat

RE: 3com 3c905b
« Reply #2 on: August 09, 2000, 03:20:43 PM »
it got a ip address and it can ping it self. but i cant ping the other pc´s on the network or ping the e-smith from other pc´s  i only get network is unreachable.
it´s only the out and incoming traffic that does´t work.


Thanx

Orville Carter

RE: 3com 3c905b
« Reply #3 on: August 10, 2000, 02:23:11 AM »
If the e-smith ip address is on the same subnet, (eg all ip's are 192.168.1.xxx and subnet mask 255.255.255.0) then I would suspect the
net card.

Some of us "gurus" make the mistake when typing ip addresses. Eg. I remember
typing 192.168.0.xxx on a Lan that was set as 192.168.1.xxx. & 255.255.255.0.  Naturally, 0.xxx cannot talk to 1.xxx while connected to the common hub.

Try swapping the net card for another and repeat the process.

Mr.Cat

RE: 3com 3c905b
« Reply #4 on: August 10, 2000, 02:47:13 AM »
The Lan has 192.168.1.xxx &255.255.255.0   i have tried swapping it in the config
but not network. tried with only one pc connected to the server without the hub. and with the hub.

Thanx