Hi pples,
have anypne comes across that ver 5.5 pptp after enabling the workgroup and domain controller for after a few days pptp stop working?
I had been using pptp/vpn in winXP connecting to e-smith ver 5.5 for awhile and been fine but after a few days i try connecting to it , it hang at verifiying username and password....... but then if i do a halt and rebooted the e-smith it works again..... but will stop working again after a few days say 2 to 3 days later....... a soft-reboot will not work.
I hope to get some advise here as i'm not experience with pptp/vpn. This my first time with it.
Here's my log:-
===============================
Mar 10 00:04:57 sglinux pptpd[4274]: MGR: Launching /usr/sbin/pptpctrl to handle client
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: local address = 10.0.0.1
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: remote address = 10.0.0.241
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: pppd speed = 460800
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: pppd options file = /etc/ppp/options.pptpd
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Client 202.156.133.36 control connection started
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Received PPTP Control Message (type: 1)
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Made a START CTRL CONN RPLY packet
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: I wrote 156 bytes to the client.
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Sent packet to client
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Received PPTP Control Message (type: 7)
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: 0 min_bps, 1525 max_bps, 32 window size
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Made a OUT CALL RPLY packet
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Starting call (launching pppd, opening GRE)
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: pty_fd = 5
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: tty_fd = 6
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: I wrote 32 bytes to the client.
Mar 10 00:04:57 sglinux pptpd[4275]: CTRL (PPPD Launcher): Connection speed = 460800
Mar 10 00:04:57 sglinux pptpd[4275]: CTRL (PPPD Launcher): local address = 10.0.0.1
Mar 10 00:04:57 sglinux pptpd[4275]: CTRL (PPPD Launcher): remote address = 10.0.0.241
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Sent packet to client
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Received PPTP Control Message (type: 15)
Mar 10 00:04:57 sglinux pptpd[4274]: CTRL: Got a SET LINK INFO packet with standard ACCMs
Mar 10 00:04:57 sglinux modprobe: modprobe: Can't locate module char-major-108
Mar 10 00:04:57 sglinux kernel: CSLIP: code copyright 1989 Regents of the University of California
Mar 10 00:04:57 sglinux kernel: PPP: version 2.3.7 (demand dialling)
Mar 10 00:04:57 sglinux kernel: PPP line discipline registered.
Mar 10 00:04:57 sglinux kernel: registered device ppp0
Mar 10 00:04:57 sglinux pppd[4275]: pppd 2.4.0 started by root, uid 0
Mar 10 00:04:57 sglinux pppd[4275]: Using interface ppp0
Mar 10 00:04:57 sglinux pppd[4275]: Connect: ppp0 <--> /dev/pts/1
Mar 10 00:05:27 sglinux pppd[4275]: LCP: timeout sending Config-Requests
Mar 10 00:05:27 sglinux pppd[4275]: Connection terminated.
Mar 10 00:05:27 sglinux pppd[4275]: Exit.
Mar 10 00:05:27 sglinux pptpd[4274]: Error reading from pppd: Input/output errorMar 10 00:05:27 sglinux pptpd[4274]: CTRL: GRE read or PTY write failed (gre,pty)=(6,5)
Mar 10 00:05:27 sglinux pptpd[4274]: CTRL: Client 202.156.133.36 control connection finished
Mar 10 00:05:27 sglinux pptpd[4274]: CTRL: Exiting now
Mar 10 00:05:27 sglinux pptpd[1584]: MGR: Reaped child 4274
=========================================
I really do not know where is wrong, it seems to me is the pppd issue.
Thanks for any advise in advance.
0 Replies
274 Views