Hi friends.
I have a disk problem.
Installed SME 9.2-
Installed one disc Size 4T-
Everything works fine.
Want to add another disc 4T -
Running at the entrance of admin-
Manage disk redundancy-
The question but I change the situation -
raid1-
, Picture mode
sda adb
from
SCSI
ATA WDC WD40EZRX-00S (Direct-Access)
ATA WDC WD4005FZBX-0 (Direct-Access)
MOUNTED FILESYSTEMS
Mountpoint Type Partition Usage Free Used Size
Totals 57.27% 1.35 TiB 2.05 TiB 3.58 TiB
/ ext4 /dev/mapper/main-root
(rw, usrquota, grpquota) 58% (1%) 1.35 TiB 2.05 TiB 3.58 TiB
/boot ext4 /dev/md0
(rw)
log
Device Boot Start End #blocks Id System
May 7 13:05:55 radiu add_drive_to_raid: /dev/sdb1 * 0+ 256000 256000+ fd Linux raid autodetect
May 7 13:05:55 radiu add_drive_to_raid: /dev/sdb2 256001 3907018583 3906762583 fd Linux raid autodetect
May 7 13:05:55 radiu add_drive_to_raid: /dev/sdb3 0 - 0 0 Empty
May 7 13:05:55 radiu add_drive_to_raid: /dev/sdb4 0 - 0 0 Empty
May 7 13:05:55 radiu add_drive_to_raid: Successfully wrote the new partition table
May 7 13:05:55 radiu add_drive_to_raid:
May 7 13:05:55 radiu add_drive_to_raid: Re-reading the partition table ...
May 7 13:05:55 radiu kernel: sdb: sdb1 sdb2
May 7 13:05:55 radiu add_drive_to_raid: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
May 7 13:05:55 radiu add_drive_to_raid: to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
May 7 13:05:55 radiu add_drive_to_raid: (See fdisk(
.)