Hi All
I want to run a 40GB IDE HD as the second drive and put the /HOME dir (Maybe as a partition) on this drive. How do I do this? I not familar with doing this an haven't found anything that might help me.
Below is the current HD install with SME Server 9.1 on the FIRST HD
[root@firewall ~]# fdisk -lu /dev/sda; fdisk -lu /dev/sdb
Disk /dev/sda: 8069 MB, 8069677056 bytes
255 heads, 63 sectors/track, 981 cylinders, total 15761088 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c86db
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 514047 256000 fd Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sda2 514048 15759359 7622656 fd Linux raid autodetect
Partition 2 does not end on cylinder boundary.
Disk /dev/sdb: 40.1 GB, 40060403712 bytes
255 heads, 63 sectors/track, 4870 cylinders, total 78242976 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x7b632462
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 208844 104391 fd Linux raid autodetect
/dev/sdb2 208845 78236549 39013852+ fd Linux raid autodetect
[root@firewall ~]#
Can anyone help me please
Teviot