Am trying to set up old PC's to PXE boot a kiosk. At present, and using our domain windows DHCP and that points to our WDT server. I have that currently working to pxeboot the PC's fine, but I have (for good reason) to press F12 to continue the boot. The boot files are hosting on the SME in an ibay.
I am trying to point DHCP to set the pxeboot options for the reserved mac address, and it is kind of working - it picks up the DHCP and sets the TFTP option onto the SME box fine, and it is requesting the pxelinux.0 file, but TFTP is timing out.
On the client I get PXE-E32: TFTP Open timeout a couple of times then it exits (as it should). If I change the pxelinux.0 filename, it comes back straight away the file can't be found, so I know the boot options are correct. Looking in the TFTP log on the server simply shows the connection made, but just checked the messages log and I see
Oct 8 15:04:02 smeserver in.tftpd[3899]: RRQ from 10.105.110.80 filename boot/pxelinux.0
Oct 8 15:04:02 smeserver in.tftpd[3899]: tftp: client does not accept options
Google around I found to add “-r blksize” ont the end of the server_args line, however that looks like it was using xinetd, SME is not using that.
Any ideas ?