slow resync, drives detected as hda instead of sda

mike_mattos

313
+0/-0

slow resync, drives detected as hda instead of sda

« on: July 14, 2015, 12:09:32 AM »

Just replaced a mother board and am watching a 2400 minute resync!

I remember a thread suggesting configuration changes that solved this issue, but various key word searches are failing to find it. Does anyone remember or have any suggestions?

Thx

Logged

...

TerryF

grumpy old man
1,826
+6/-0

Re: slow resync, drives detected as hda instead of sda

« Reply #1 on: July 14, 2015, 02:09:57 AM »

These discussions may be helpful:

http://forums.contribs.org/index.php?topic=50272.0

and

http://forums.contribs.org/index.php?topic=50813.0

Logged

--
qui scribit bis legit

CharlieBrady

6,918
+3/-0

Re: slow resync, drives detected as hda instead of sda

« Reply #2 on: July 14, 2015, 02:36:58 PM »

Upgrading to SME9 might also be helpful; using old software with new hardware can sometimes result in sub-optimal performance.

Logged

mauro

101
+0/-0

Re: slow resync, drives detected as hda instead of sda

« Reply #3 on: July 21, 2015, 09:51:14 AM »

Mike_mattos
I had a similar issue a long time ago, see if this article can give you any hint (it worked for me)

http://jorgenmodin.net/index_html/archive/2009/10/27/getting-hard-disks-up-to-dma-speed-on-proliant-ml110centos-linux

Logged

All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer.
-- IBM maintenance manual (1975)