I all
after installing sme8-admin I received an email with the subject "[STATUS] host.domain".
The content of the email was:
Wed May 22 13:31:16 2013
Server status
Number of opened connections : ssh=0 ftp=0 vpn=0 netbios=0
#>tail /var/log/messages :
May 22 13:31:10 sme esmith::event[3454]: Processing event: local
May 22 13:31:10 sme esmith::event[3454]: Running event handler: /etc/e-smith/events/actions/generic_template_expand
May 22 13:31:10 sme esmith::event[3454]: expanding /etc/sysconfig/kernel
May 22 13:31:11 sme esmith::event[3454]: expanding /boot/grub/grub.conf
May 22 13:31:11 sme esmith::event[3454]: generic_template_expand=action|Event|local|Action|generic_template_expand|Start|1369222270 481947|End|1369222271 513845|Elapsed|1.031898
May 22 13:31:11 sme esmith::event[3454]: Running event handler: /etc/e-smith/events/local/S50clear-pptp-interfaces
May 22 13:31:11 sme esmith::event[3454]: S50clear-pptp-interfaces=action|Event|local|Action|S50clear-pptp-interfaces|Start|1369222271 514084|End|1369222271 566615|Elapsed|0.052531
May 22 13:31:11 sme esmith::event[3454]: Running event handler: /etc/e-smith/events/actions/adjust-services
May 22 13:31:11 sme esmith::event[3454]: adjusting supervised yum (once)
May 22 13:31:11 sme esmith::event[3454]: adjust-services=action|Event|local|Action|adjust-services|Start|1369222271 566869|End|1369222271 724655|Elapsed|0.157786
#>netstat --numeric-hosts -tpu :
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 192.168.1.100:35449 109.230.212.54:http TIME_WAIT -
tcp 0 0 192.168.1.100:43235 94.23.27.24:http TIME_WAIT -
tcp 0 0 192.168.1.100:38180 194.116.84.14:http TIME_WAIT -
tcp 0 0 192.168.1.100:38192 194.116.84.14:http TIME_WAIT -
tcp 0 0 127.0.0.1:ldap 127.0.0.1:45099 TIME_WAIT -
tcp 0 0 127.0.0.1:45100 127.0.0.1:ldap TIME_WAIT -
tcp 0 0 127.0.0.1:45098 127.0.0.1:ldap TIME_WAIT -
tcp 0 0 192.168.1.100:40735 213.83.42.56:http TIME_WAIT -
tcp 0 0 192.168.1.100:45225 193.206.139.34:http TIME_WAIT -
tcp 0 0 192.168.1.100:45218 193.206.139.34:http TIME_WAIT -
tcp 0 0 192.168.1.100:42063 213.218.173.29:http TIME_WAIT -
tcp 0 0 192.168.1.100:33948 194.14.179.253:http TIME_WAIT -
tcp 0 0 192.168.1.100:33952 194.14.179.253:http TIME_WAIT -
tcp 0 0 192.168.1.100:42400 178.63.77.43:http TIME_WAIT -
tcp 0 0 192.168.1.100:37570 62.141.54.220:http TIME_WAIT -
tcp 0 0 192.168.1.100:39482 213.92.90.124:http TIME_WAIT -
tcp 0 0 192.168.1.100:55846 194.8.197.22:http TIME_WAIT -
tcp 0 0 192.168.1.100:45759 93.63.209.92:http TIME_WAIT -
tcp 0 0 192.168.1.100:45767 93.63.209.92:http TIME_WAIT -
tcp 0 0 192.168.1.100:41879 93.186.241.211:http TIME_WAIT -
tcp 0 0 192.168.1.100:43126 85.25.19.141:http TIME_WAIT -
tcp 0 0 192.168.1.100:48007 85.31.185.102:http TIME_WAIT -
tcp 0 1 192.168.1.100:54637 202.67.194.60:http SYN_SENT 3488/python
tcp 0 0 192.168.1.100:54628 202.67.194.60:http TIME_WAIT -
tcp 0 0 192.168.1.100:54627 202.67.194.60:http TIME_WAIT -
tcp 0 0 192.168.1.100:54626 202.67.194.60:http TIME_WAIT -
#>service httpd-e-smith status
run: /service/httpd-e-smith: (pid 2993) 21s, normally down
#>service httpd-admin status
run: /service/httpd-admin: (pid 2965) 21s, normally down; run: log: (pid 1602) 83s
#>service smb status
run: /service/nmbd: (pid 3142) 20s, normally down; run: log: (pid 1600) 83s
run: /service/smbd: (pid 3155) 20s, normally down; run: log: (pid 1598) 83s
#>service sshd status
run: /service/sshd: (pid 3002) 22s, normally down; run: log: (pid 1589) 84s
I seem to have realized that it is a report of the state of the machine at the time of installation of sme8-admin.
How can I generate this report manually?