Koozali.org: home of the SME Server

[SOLVED] Missing Data from Squid Report Generator ('report_type' was set to denied in /etc/sarg/sarg

Offline ghorst352

  • ****
  • 180
  • +0/-0
I currently use SME Server 7.5.1 along with the Squid Report Generator.  Last week I configured squidguard to use the Shalla black list which works fine.  However whenever I pop open the SME Server Manager and browse to the 'Squid Report Generator' I see no information since Nov. 30th, ((((see below))))).  What's funny is it shows the total Bytes of information within the file but no 'users' or 'average'.  If I browse /var/log/squid/access.log there is continually information being pushed into this file so I know for sure that number one my access.log is working, number 2 squid is working, number 3 the blacklist is also working.  I would imagine its permissions but I am not certain where to look.  Please Help !!!!!!!!!!!!!  :shock:


Here is what my squid report generated report for daily looks like..........Notice no users or average since December 1st
   
FILE/PERIOD   CREATION DATE                               USERS   BYTES           AVERAGE
2011Dec08-2011Dec08   Fri Dec 9 08:45:30 EST 2011              705.392.761   0
2011Dec08-2011Dec08.1Fri Dec 9 04:04:22 EST 2011              705.392.761   0
2011Dec07-2011Dec07   Thu Dec 8 04:03:52 EST 2011      616.196.374   0
2011Dec06-2011Dec06   Wed Dec 7 04:05:51 EST 2011      633.214.925   0
2011Dec05-2011Dec05   Tue Dec 6 04:05:14 EST 2011      599.034.396   0
2011Dec04-2011Dec04   Mon Dec 5 04:04:40 EST 2011      505.500           0
2011Dec03-2011Dec03   Sun Dec 4 04:04:23 EST 2011      152.908.149   0
2011Dec02-2011Dec02   Sat Dec 3 04:03:57 EST 2011              922.398.369   0
2011Dec01-2011Dec01   Fri Dec 2 04:03:52 EST 2011              875.163.939   0
2011Nov30-2011Nov30   Thu Dec 1 04:03:41 EST 2011   24   590.789.858   24.616.244
2011Nov29-2011Nov29   Wed Nov 30 04:03:37 EST 2011   23   793.305.735   34.491.553
2011Nov28-2011Nov28   Tue Nov 29 04:03:29 EST 2011   23   989.187.482   43.008.151
2011Nov27-2011Nov27   Mon Nov 28 04:03:10 EST 2011   8   492.163           61.520
2011Nov26-2011Nov26   Sun Nov 27 04:04:15 EST 2011   8   1.061.421           132.677
2011Nov25-2011Nov25   Sat Nov 26 04:03:34 EST 2011   8   532.507           66.563
2011Nov24-2011Nov24   Fri Nov 25 04:03:34 EST 2011   9   520.062           57.784
2011Nov23-2011Nov23   Thu Nov 24 04:03:44 EST 2011   23   466.858.349   20.298.189
2011Nov22-2011Nov22   Wed Nov 23 04:03:44 EST 2011   22   818.454.377   37.202.471
2011Nov21-2011Nov21   Tue Nov 22 04:03:32 EST 2011   23   496.553.403   21.589.278
2011Nov20-2011Nov20   Mon Nov 21 04:03:17 EST 2011   8   281.336           35.167
2011Nov19-2011Nov19   Sun Nov 20 04:04:13 EST 2011   9   698.960           77.662
2011Nov18-2011Nov18   Sat Nov 19 04:03:59 EST 2011   22   300.007.583   13.636.708
2011Nov17-2011Nov17   Fri Nov 18 04:05:02 EST 2011   23   647.659.420   28.159.105
2011Nov16-2011Nov16   Thu Nov 17 04:05:07 EST 2011   24   715.690.481   29.820.436
2011Nov15-2011Nov15   Wed Nov 16 04:04:42 EST 2011   23   658.596.972   28.634.650


 

Offline CharlieBrady

  • *
  • 6,918
  • +3/-0
Re: Missing Data from Squid Report Generator (Only in the web interface?)
« Reply #1 on: December 09, 2011, 08:31:52 PM »
I currently use SME Server 7.5.1 along with the Squid Report Generator.  Last week I configured squidguard to use the Shalla black list which works fine.

Your post is off-topic for this forum, since neither squidguard nor Squid Report Generator is installed from the SME server installation CDROM.

I suggest you report your problem to whoever maintains the Squid Report Generator contrib (assuming there is one, and that is what you installed on your system). Use the "BUGS" button at the top of this page.

Offline ghorst352

  • ****
  • 180
  • +0/-0
Re: Missing Data from Squid Report Generator (Only in the web interface?)
« Reply #2 on: December 19, 2011, 07:51:23 PM »
This issue was resolved.  Inside the /etc/sarg/sarg.conf file under the directive 'report_type' was set to denied, thereby giving an incomplete report, only showing denied access.

Offline chris burnat

  • ****
  • 1,135
  • +2/-0
    • http://www.burnat.com
Re: Missing Data from Squid Report Generator (Only in the web interface?)
« Reply #3 on: December 19, 2011, 11:22:49 PM »
Moving to Contribs section and changing summary to reflect situation.
- chris
If it does not work out of the box, please fill in a Bug Report @ Bugzilla (http://bugs.contribs.org)  - check: http://wiki.contribs.org/Bugzilla_Help .  Thanks.