Koozali.org: home of the SME Server

smeserver-freepbx

Offline Teviot

  • *
  • 610
  • +0/-0
Re: smeserver-freepbx
« Reply #15 on: March 23, 2009, 06:19:55 PM »
Thank you for your response.  Will give this a try soon.
Regards
M0GLJ
......................................................
I am new to SAIL SME Server v8b6 and have been using SME for many years.
I have already done some research and only ask questions if I still can't work it out.

Offline wires

  • **
  • 62
  • +0/-0
Re: smeserver-freepbx
« Reply #16 on: March 31, 2009, 10:33:04 PM »
nice system, i am giving it a try right now..

VIP-ire, i followed your guide in wiki.contribs and everything is working accordingly to plan.

now i need to figure out how to use it and what hardware i need to install on my server to be able to pick up calls and also which landline phones work with this.
« Last Edit: March 31, 2009, 10:44:38 PM by wires »

Offline Daniel B.

  • *
  • 1,699
  • +0/-0
    • Firewall Services, la sécurité des réseaux
Re: smeserver-freepbx
« Reply #17 on: March 31, 2009, 10:35:18 PM »
an error arise when i try to go to the panel page, i get this error: Couldn't load variables.txt?aldope=80715
I think this error will disappear once you have created some extensions/trunks
C'est la fin du monde !!! :lol:

Offline wires

  • **
  • 62
  • +0/-0
Re: smeserver-freepbx
« Reply #18 on: March 31, 2009, 10:45:21 PM »
sorry i was too quick in posting that error, i reboot the system and the error is gone.

where is the directory to put wav/mp3 waiting sounds ?
i need to learn the home phone codes to use with FreePBX and i might just get a new phone today if someone help me thru it! seems complicated, looks like something they use at my work place too..
« Last Edit: March 31, 2009, 10:59:31 PM by wires »

Offline Daniel B.

  • *
  • 1,699
  • +0/-0
    • Firewall Services, la sécurité des réseaux
Re: smeserver-freepbx
« Reply #19 on: April 01, 2009, 09:41:25 AM »
where is the directory to put wav/mp3 waiting sounds ?
You can upload files using the music on hold module in FreePBX. Please, read the official documentation for more detail: http://freepbx.org/support/documentation
C'est la fin du monde !!! :lol:

Offline keystar

  • 1
  • +0/-0
Re: smeserver-freepbx
« Reply #20 on: April 01, 2009, 05:35:55 PM »
Hi there VIP-ire,
Firstly, thanks very much for your contributions to this Free PBX project. I have been a user of A@H and Trixbox for some time and am very pleased to see the FreePBX contribution for SME Server.

I have a Digium TDM400 card installed in my system but I am not able to set up the ZAP Trunks. I have installed the DAHDI drivers and the system recognises the card (the LED's are on) but they are not shown on the trunks list.

Any assistance or advice would be greatly appreciated.

Once again thanks for your effort!

Regards,

Offline wires

  • **
  • 62
  • +0/-0
Re: smeserver-freepbx
« Reply #21 on: April 02, 2009, 05:49:46 AM »
thanks VIP-ire for the reply, i know that i can use the admin area to put the music, i asked that question too fast again.

Offline Bud

  • *
  • 487
  • +0/-0
Re: smeserver-freepbx
« Reply #22 on: April 17, 2009, 01:15:39 AM »
Hi there VIP-ire,
Thanks very much for your help on the Free PBX project. I am a noob at asterisk/freepbx and need some help. Still doing the Baby Steps.

I have a Digium TDM410P card installed in my system. I can see that the Card is Listed on my SME Server (using hardware contrib) Where do I look in FreePBX to see if the Card is Detected for me to use. What is my First step after the Card has been Recognised by FreePBX.

Any Help Greatly Appreciated

Offline jmbac

  • *
  • 35
  • +0/-0
Re: smeserver-freepbx
« Reply #23 on: April 17, 2009, 05:15:13 PM »
If you have DAHDI-TOOLS installed  try the following command;

Code: [Select]
modprobe dahdi
Code: [Select]
dahdi_cfg -v

DAHDI Tools Version - 2.1.0.2

DAHDI Version: 2.1.0.4
Echo Canceller(s):
Configuration
======================


jon


0 channels to configure.

Offline Bud

  • *
  • 487
  • +0/-0
Re: smeserver-freepbx
« Reply #24 on: April 18, 2009, 06:44:16 AM »
jmbac thanks for the reply

when i do " modprobe dahdi " i get * Module dahdi not found *

when i do " dahdi_cfg -v " i get

DAHDI Tools Version - 2.1.0.2

Notice: configuration file is /etc/dahdi/system.conf
line 0: Unable to open master device '/dev/dahdi/ct1'

1 error(s) detected


what now?

thanks for your help
« Last Edit: April 18, 2009, 06:49:35 AM by Bud »

Offline David Harper

  • *
  • 653
  • +0/-0
  • Watch this space
    • Workgroup Technology Solutions
Re: smeserver-freepbx
« Reply #25 on: April 18, 2009, 09:48:14 AM »
Does the DAHDI driver match the current kernel?

Offline Bud

  • *
  • 487
  • +0/-0
Re: smeserver-freepbx
« Reply #26 on: April 18, 2009, 10:55:28 AM »
hi david

Quote
Does the DAHDI driver match the current kernel?

i'm sorry i don't know how to find this out. still a noob at this

Offline jmbac

  • *
  • 35
  • +0/-0
Re: smeserver-freepbx
« Reply #27 on: April 18, 2009, 06:04:12 PM »
Run this command
Code: [Select]
uname -r
2.6.18-128.1.6.el5

Offline Bud

  • *
  • 487
  • +0/-0
Re: smeserver-freepbx
« Reply #28 on: April 18, 2009, 06:19:46 PM »
jmbac thanks for the help

Code: [Select]
when i run " uname -r "
i get " 2.6.9-78.0.8.Elsmp "

what now ?  do i have to use a bigger hammer :grin:

Offline jmbac

  • *
  • 35
  • +0/-0
Re: smeserver-freepbx
« Reply #29 on: April 18, 2009, 06:26:04 PM »
Also run this command to check dahdi kernel modules installed

Code: [Select]
rpm -qa | grep dahdi