Hello VIP-ire,
i have the 2 RPMs coova-chilli-1.0.11-1.i386.rpm and smeserver-coova-chilli-0.1-1.noarch.rpm but can not login via the login web pages, can you give me some howtow
I'd need more informations about what you've done, what's not working etc...
- Is server in server&gateway ?
- Do you have a third ethernet interface recognized by the system but not configured (try ifconfig eth2) ?
- You have installed the 2rpms then post-upgrade/reboot (or just signal-event chilli-update;/etc/init.d/chilli start) ?
- Is chilli daemon runing ? (ps aux | grep chilli)
- You have plug an AP on the third interface (It must be an AP or a switch, not a router) ?
- Do you have an IP in the subnet 10.1.0.0/24 when you ask for dhcp ?
- Is the DNS working on the client ?
- Can you see the login page when you ask for any web page ?
- Have you created the group called "chilli" and the users who must have web access in it ?
I know some documentation is missing, I'll try to write it as soon as I can in the wiki. Waiting for this, there's some documentation in french:
http://sme.firewall-services.com/spip.php?rubrique28Note: in many forums stand that the CoovaChili had alot of bugs, is the original chillispot vs CoovaChili
ChilliSpot: http://www.chillispot.info/
CoovaChili : http://coova.org/wiki/index.php/CoovaChilli
Thanks
I'm not sure where you have see that coovachilli has more bugs than the original chillispot. I know coovachilli is a fork, and I've choosed it over chillispot:
- because the project is active
- because of the walled-garden which can be limited to host/port/protocol (this is the main motivation)
- some other facilities
Cheers.