I could use a little help. I had (past tense) a perfectly good SME7.1 server that was flawless for quite some time. Then I decided to move everything to a better machine and run 7.2. Now I can't seem to get the new server to allow web access from the outside. I'll try to provide the information that would help figure this out.
Ibays are set to allow public web access and write=group read=everyone and domains are set to point to them.
I can ping both the IP and domain name from the outside, but get nothing if I browse there.
Server Mode servergateway
Local IP address / subnet mask 192.168.183.1/255.255.255.0
External IP address / subnet mask 192.168.1.96
Additional local networks 192.168.183.0/255.255.255.0
DHCP server enabled
Beginning of DHCP address range 192.168.183.65
End of DHCP address range 192.168.183.253
Server names
DNS server 192.168.183.1
Web server
www.servername.localProxy server proxy.servername.local:3128
FTP server ftp.servername.local
SMTP, POP, and IMAP mail servers mail.servername.local
Web services State Nb process Action
Administrative services State Nb process Action
sme7admind Started 1
Network services State Nb process Action
File-sharing services State Nb process Action
atalkd Started 1
E-mail services State Nb process Action
DNS services State Nb process Action
Authentication services State Nb process Action
Misc. services State Nb process Action
System services State Nb process Action
crond Started 1
syslogd Started 1
klogd Started 1
acpid Started 1
I am using dyndns.org custom services, which have been stone reliable in the past.
It appears that webservices, network services, DNS, Authentication Services are not running. If this is the problem, how do I start the services, or have I just blown the new setup altogether?
An old rookie thanks you.