Koozali.org: home of the SME Server

Hylafax Re-visited Yet Again

emo82

ok
« Reply #60 on: April 19, 2007, 03:19:30 PM »
the ttyS was wrong in /etc/inittab.

Now everythyng is ok and working. Now i am going to configure the server for my needs!!

Thank you very much again CBACANI

Offline soprom

  • *
  • 589
  • +0/-0
    • www.logiciel-libre.org
Hylafax Re-visited Yet Again
« Reply #61 on: April 22, 2007, 05:32:57 PM »
A great contrib with a server-manager interface is now working on SME7:

Source: http://forums.ixus.fr/viewtopic.php?t=37658&highlight=smerpfax

wget ftp://ftp.hylafax.org/binary/linux/redhat/RPMS/i386/hylafax-4.2.5-1rhel4.i386.rpm
yum -y --enablerepo=base --enablerepo=updates localinstall hylafax-4.2.5-1rhel4.i386.rpm

rpm -ivh http://smerp.free.fr/fichiers/binaires/SMERPFax-0.8b1-1.noarch.rpm

delete /tmp/rpm ghostscript-fonts-6.0 and hylafax-4.2.0-1rh7.i386.rpm

then run /tmp/SMERPFax.ins/SMERPFax_ins.sh
Sophie from Montréal

Offline del

  • *
  • 765
  • +0/-0
Hylafax Re-visited Yet Again
« Reply #62 on: April 26, 2007, 04:30:53 AM »
Hi All,

I have had hylafax running for a while now and used Chaloner's howto. I have been using winprint fax as the client and would like to use the fax to email gateway, my question is can I just install the smeserver-hylafax-0.9-3.noarch.rpm? My concern is that according to the howto on the wiki it creates a user called faxmaster and I have already got this user on my system :D Should I delete faxmaster first or will the smeserver-hylafax-0.9-3.noarch.rpm realize that the user exists and not create another? Thanks in advance.

Regards,
Del
If at first you don't succeed, then sky-diving is not for you!
"Life is like a coin. You can spend it anyway you wish, but you can only spend it once." --Author Unknown

Offline kb-ohnemus

  • ****
  • 154
  • +0/-0
    • http://www.kb-ohnemus.de
Hylafax Re-visited Yet Again
« Reply #63 on: April 27, 2007, 08:11:50 AM »
Hi,

one question: What exactly does Smerpfax do? I could't find any non-french documentation. I already have a working hylafax, will Smerpfax allow to send fax over mail and can I add it to the existing hylafax-setup?

Offline soprom

  • *
  • 589
  • +0/-0
    • www.logiciel-libre.org
Hylafax Re-visited Yet Again
« Reply #64 on: April 27, 2007, 04:21:15 PM »
The most interesting part of SMERPfax is to provide a server-manager panel to configure le fax. It can be used to stop the fax server, disable/enable ansering... without the command line.
Sophie from Montréal

Offline Franco

  • *
  • 1,171
  • +0/-0
    • http://contribs.org
Hylafax Re-visited Yet Again
« Reply #65 on: April 27, 2007, 04:25:56 PM »
Quote
I already have a working hylafax, will Smerpfax allow to send fax over mail and can I add it to the existing hylafax-setup?

Yes, you can install over an existing setup  :wink:

Offline brick

  • ***
  • 78
  • +0/-0
Hylafax Re-visited Yet Again
« Reply #66 on: April 30, 2007, 12:03:22 AM »
How can I make use of the sambafax? Any hints?

Offline Franco

  • *
  • 1,171
  • +0/-0
    • http://contribs.org
Hylafax Re-visited Yet Again
« Reply #67 on: May 07, 2007, 07:38:38 PM »
Quote from: "brick"
How can I make use of the sambafax? Any hints?


Use it with the WinPrintHylafax program, point it to the sambafax and voilá

Thanks,

hgr

Hylafax Re-visited Yet Again
« Reply #68 on: August 09, 2007, 11:35:57 PM »
Quote from: "soprom"
A great contrib with a server-manager interface is now working on SME7:

Source: http://forums.ixus.fr/viewtopic.php?t=37658&highlight=smerpfax

wget ftp://ftp.hylafax.org/binary/linux/redhat/RPMS/i386/hylafax-4.2.5-1rhel4.i386.rpm
yum -y --enablerepo=base --enablerepo=updates localinstall hylafax-4.2.5-1rhel4.i386.rpm

rpm -ivh http://smerp.free.fr/fichiers/binaires/SMERPFax-0.8b1-1.noarch.rpm

delete /tmp/rpm ghostscript-fonts-6.0 and hylafax-4.2.0-1rh7.i386.rpm

then run /tmp/SMERPFax.ins/SMERPFax_ins.sh


Hi Sophie.

I have been fighting with the Fax setup on SME Server and then I discovered your post.

Tried to installe it and finally got something in the SME control panel that I could understand.

But I need to ask you if it following your example will create a full working fax server installation including SME Server control panel, without the need of go an run all these many scripts that I have seen in this thread

Offline soprom

  • *
  • 589
  • +0/-0
    • www.logiciel-libre.org
Hylafax Re-visited Yet Again
« Reply #69 on: August 10, 2007, 03:16:28 AM »
I'm not sure about what you mean by "full" fax server...
You might want to give a look at Cypheus if you want a fax manager/client with buttons and menus.

The above contrib is to provide a server with fax functions (in/out) and a network printer to send fax.
Sophie from Montréal

Offline psoren

  • *
  • 371
  • +0/-0
Hylafax Re-visited Yet Again
« Reply #70 on: August 10, 2007, 10:52:50 PM »
Quote from: "soprom"
A great contrib with a server-manager interface is now working on SME7:

Source: http://forums.ixus.fr/viewtopic.php?t=37658&highlight=smerpfax

wget ftp://ftp.hylafax.org/binary/linux/redhat/RPMS/i386/hylafax-4.2.5-1rhel4.i386.rpm
yum -y --enablerepo=base --enablerepo=updates localinstall hylafax-4.2.5-1rhel4.i386.rpm

rpm -ivh http://smerp.free.fr/fichiers/binaires/SMERPFax-0.8b1-1.noarch.rpm

delete /tmp/rpm ghostscript-fonts-6.0 and hylafax-4.2.0-1rh7.i386.rpm

then run /tmp/SMERPFax.ins/SMERPFax_ins.sh


Hi Sophie

Would it be possible to install just the server panel, since i really like that, but i use hylafax with a different setup ??

Per

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
Re: Hylafax Re-visited Yet Again
« Reply #71 on: August 14, 2007, 11:01:58 PM »
What modems are you all using?  I have some older USR 33.6 faxmodems that I used with 6.5, but they don't seem to be working with 7.2?  I'm going to load 6.5 and see if they still work.  My dip switches got changed by some nosey kids of mine, so it may take me a while to verify this.  If anyone is using these modems, would you send me the dip switch settings, please.

Thanks,

John
......

Offline bunkobugsy

  • *
  • 274
  • +4/-0
Re: Hylafax Re-visited Yet Again
« Reply #72 on: August 14, 2007, 11:46:23 PM »
DIP Switch Settings for the Sportster Modem
1  UP          DATA TERMINAL READY NORMAL
    DOWN   DTR OVERRIDE
2  UP          VERBAL RESULT CODES
    DOWN   NUMERIC RESULT CODES
3  UP           SUPPRESS RESULT CODES
    DOWN    DISPLAY RESULT CODES
4  UP           ECHO OFF LINE COMMANDS
    DOWN    NO ECHO, OFFLINE COMMANDS
5  UP           AUTO ANSWER ON RING
    DOWN    SUPPRESS AUTO ANSWER
6  UP           CARRIER DETECT NORMAL
    DOWN    CARRIER DETECT OVERRIDE
7  UP           LOAD NVRAM DEFAULTS
    DOWN    LOAD FACTORY DEFAULTS
8  UP           DUMB MODE
    DOWN    SMART MODE
FACTORY DEFAULT SETTINGS FOR THE SPORTSTER MODEM IS 3,5 AND 8 DOWN, ALL THE REST UP.

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
Re: Hylafax Re-visited Yet Again
« Reply #73 on: August 15, 2007, 03:41:58 PM »
DIP Switch Settings for the Sportster Modem
1  UP          DATA TERMINAL READY NORMAL
    DOWN   DTR OVERRIDE
2  UP          VERBAL RESULT CODES
    DOWN   NUMERIC RESULT CODES
3  UP           SUPPRESS RESULT CODES
    DOWN    DISPLAY RESULT CODES
4  UP           ECHO OFF LINE COMMANDS
    DOWN    NO ECHO, OFFLINE COMMANDS
5  UP           AUTO ANSWER ON RING
    DOWN    SUPPRESS AUTO ANSWER
6  UP           CARRIER DETECT NORMAL
    DOWN    CARRIER DETECT OVERRIDE
7  UP           LOAD NVRAM DEFAULTS
    DOWN    LOAD FACTORY DEFAULTS
8  UP           DUMB MODE
    DOWN    SMART MODE
FACTORY DEFAULT SETTINGS FOR THE SPORTSTER MODEM IS 3,5 AND 8 DOWN, ALL THE REST UP.


Thanks for your reply.  I didn't state my question correctly.  I know what those settings are, they are on the back of the modem.  I want to know what the settings are from someone that is using this modem with hylafax.

John
......

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
Re: Hylafax Re-visited Yet Again
« Reply #74 on: August 22, 2007, 06:08:48 AM »

Yes, you can install over an existing setup  :wink:

Would/can you make the src rpm available?

John
......