Koozali.org: home of the SME Server

[HOW TO] Install eGroupWare on SME 7.x

Offline kevinb

  • *
  • 237
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #105 on: May 30, 2007, 04:52:04 AM »
cool3400,

I ran this:
Code: [Select]
cp -f /opt/egroupware/html/phpgwapi/doc/ldap/phpgwaccount.schema /etc/openldap/schema/
cp -f /opt/egroupware/html/phpgwapi/doc/ldap/phpgwcontact.schema /etc/openldap/schema/
mkdir -p /etc/e-smith/templates-custom/etc/openldap/slapd.conf
cp -f /etc/e-smith/templates/etc/openldap/slapd.conf/10schema /etc/e-smith/templates-custom/etc/openldap/slapd.conf/
echo "include         /etc/openldap/schema/phpgwaccount.schema" >> /etc/e-smith/templates-custom/etc/openldap/slapd.conf/10schema
echo "include         /etc/openldap/schema/phpgwcontact.schema" >> /etc/e-smith/templates-custom/etc/openldap/slapd.conf/10schema
echo >> /etc/e-smith/templates-custom/etc/openldap/slapd.conf/10schema
expand-template /etc/openldap/slapd.conf
service ldap restart


And then change the permissions of "/etc/openldap/schema/phpgw*" to allow read from everyone.


I wish I have some idea of what to enter for the LDAP information in the eGruopware setup. I have been searching but do not understand this .... yet.


Kevin

Offline imcintyre

  • *
  • 609
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #106 on: June 01, 2007, 04:19:14 PM »
Has anybody upgraded to v 1.4?

 I had some issues with some of the missing functions in V1.2. When I checked with the egroupware web site forum, they told me my problems would be solved ( :roll: ) with an upgrade to V 1.4.

Thx in advance.

Offline jester

  • *
  • 496
  • +1/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #107 on: June 01, 2007, 04:45:41 PM »
eGroupWare 1.4 is still a RC, one of these days it should become final cause they planned to release it during LinuxTag that is running until tomorrow, so....

Offline imcintyre

  • *
  • 609
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #108 on: June 01, 2007, 06:39:43 PM »
Thx for the heads up, I have enough problems just muddling through regular issues...

tadej.cepin

eGroupWare ver. 1.4.x final release is out
« Reply #109 on: June 06, 2007, 09:39:06 AM »
It would be nice if someone provide script and rpm for instalation of new v1.4.x eGW on SME 7.x ;)

Offline cool34000

  • *
  • 339
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #110 on: June 18, 2007, 08:49:44 PM »
Hi all


Anyone using eGroupWare v1.2.106 should update ASAP as security issues were found. See http://www.egroupware.org/news for more details.
You have 2 choices:
1) update to v1.4
2) update to v1.2.107

Berdie made this rpm based on the new release of v1.4 but there are not many contribs available right now as it's a new version.

So, as an alternative, I've made an rpm based on v1.2.107 to benefit from all features. All security issues are fixed in this release, as in v1.4.
This rpm can be found here
Installation process is the same, you just have to create eGroupWare's admin account and change both Header admin and Config admin passwords.
SME users can login (email auth) with their login/password


Please note that both rpms cannot update an existing installation of eGroupWare
For more details on how to upgrade an existing installation, RTFM!


Best regards,
Sylvain

heyyo

Adress Book
« Reply #111 on: June 23, 2007, 07:27:01 PM »
I have installed the new RPM egroupware 1.4 on SME 7.1.3 + php5 + mysql 5. I would like to set up LDAP settings in Egroupware's administration panel to see my SME users and group in the Egroupware's adressbook.
my domain is of the type mydomain.dyndns.org.
Any help would be appreciated.

Offline kevinb

  • *
  • 237
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #112 on: June 23, 2007, 09:51:59 PM »
I would love to get this answered. I have been beating my head against this wall for weeks.

It appears that the 1.4 version of EGW does not require the installation of new schemas.

But I have yet to get EGW to read the LDAP store, write to the LDAP store or authenticate against the LDAP store.

There is some activity on this in the bug tracker.

Kevin

Offline Peasant

  • *
  • 143
  • +2/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #113 on: June 29, 2007, 05:18:00 PM »
Just tried installing from the contib for the first time. I notice that if I go into 'Edit Configuration' in the config-admin it lists the hostname of the machine on which the installation is running as musterfirma.com This is also listed under mail domain. I've a feeling these shouldn't be there, but can someone confirm this for me?

Thanks.
Jim

Offline cool34000

  • *
  • 339
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #114 on: June 29, 2007, 05:34:21 PM »
Hi...


You don't tell which RPM you installed. Is it v1.2.x or v1.4.x ?
And witch release did you used?
Did you follow install instructions after RPM is installed?
We need details to help :wink:


To everyone:
This thread is about v1.2.x and there is an otherone about v1.4.x
Post in the appropriate thread please.
Thanks in advance.



Best regards,
Sylvain

allforone

egroupware installation http 403 forbidden problem
« Reply #115 on: August 01, 2007, 12:28:15 AM »
1. New 7.2 install  without the updates that appear after the installation.
2. when trying to access the configuration screen I get a HTTP 403 forbidden at this address http://hserver/egroupware/setup
3. I looked in the primary Ibay and saw nothing.
4. Boot Log errors ( these were the only ones)
Jul 31 11:02:27 hserver 10fix_privilege_tables: ERROR
Jul 31 11:02:27 hserver 10fix_privilege_tables:  1060 (42S21) at line 22: Duplicate column name 'File_priv'
Jul 31 11:02:27 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 28: Duplicate column name 'Grant_priv'
Jul 31 11:02:27 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 29: Duplicate column name 'Grant_priv'
Jul 31 11:02:27 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 30: Duplicate column name 'Grant_priv'
Jul 31 11:02:27 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 41: Duplicate column name 'ssl_type'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1054 (42S22) at line 87: Unknown column 'Type' in 'columns_priv'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 93: Duplicate column name 'type'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 103: Duplicate column name 'Show_db_priv'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 120: Duplicate column name 'max_questions'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 130: Duplicate column name 'Create_tmp_table_priv'
Jul 31 11:02:32 hserver 10fix_privilege_tables: ERROR 1060 (42S21) at line 133: Duplicate column name 'Create_tmp_table_priv'
Jul 31 11:02:33 hserver 10fix_privilege_tables: ERROR 1061 (42000) at line 141: Duplicate key name 'Grantor'
Jul 31 11:02:36 hserver 10fix_privilege_tables: @hadGrantPriv:=1
Jul 31 11:02:36 hserver 10fix_privilege_tables: 1
Jul 31 11:02:36 hserver 10fix_privilege_tables: 1
Jul 31 11:02:36 hserver 10fix_privilege_tables: @hadShowDbPriv:=1
Jul 31 11:02:36 hserver 10fix_privilege_tables: 1
Jul 31 11:02:36 hserver 10fix_privilege_tables: 1
Jul 31 11:02:36 hserver 10fix_privilege_tables: waiting for mysqld to restart
Jul 31 11:02:37 hserver mysql.init: Loading 10fix_privilege_tables into mysql succeeded
Jul 31 11:02:37 hserver mysql.init: Loading 20mysql_migrate_horde into mysql succeeded
Jul 31 11:02:37 hserver mysql.init: Loading 21horde.mysql_set_password into mysql succeeded
Jul 31 11:02:37 hserver mysql.init: Loading 30horde_mysql_create_tables into mysql succeeded
Jul 31 11:02:38 hserver mysql.init: Loading 40horde_mysql_create_indexes into mysql succeeded


Also, sorry for posting in the wrong area, It will not happen again, community, I am new to posting.

Offline wr19026

  • 15
  • +0/-0
Re: egroupware installation http 403 forbidden problem
« Reply #116 on: August 03, 2007, 09:19:51 PM »
Quote from: "allforone"
1. New 7.2 install  without the updates that appear after the installation.
2. when trying to access the configuration screen I get a HTTP 403 forbidden at this address http://hserver/egroupware/setup

[snip]


I ran into exactly the same problem, anyone have any ideas?

EDIT: Beats me, but now it works :)

Offline cool34000

  • *
  • 339
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #117 on: August 03, 2007, 11:10:00 PM »
Hi,

What version are you using? 1.2.x or 1.4.x?
I've tested v1.2.107 on my new SME 7.2 (with updates) and it still works very well...
The error you've seen is not egroupware related: it's talking about horde.
Please rise a bug or search if there are no bugs about this problem.

Don't expect to see anything in Primary ibays, RPM install goes in /opt (both versions)

There are a lot of chance that you messed up your apache configuration and that after a reconfiguration all came back (thanks to the template system!)

Offline supersonico

  • *
  • 28
  • +0/-0
[HOW TO] Install eGroupWare on SME 7.x
« Reply #118 on: August 10, 2007, 10:07:03 PM »
Hi there.

Cool34000 is such a great howto and RPMS. thanks

I want to make a suggestion to any body that use EGW1.2 and want to use the funambol plug-in.

don't use the funambol plug-in 6.0.14 it doesn't work. so I finally make it work with the funambol-outlook-plugin-3.0.15.exe

available at

http://forge.objectweb.org/project/showfiles.php?group_id=96

In other hand I cant not make work the site-mgr in the root of the webserver.

Yes to use the site-mgr as the default web page in the server.

Offline nefkho

  • ****
  • 183
  • +0/-0
    • http://www.cagothonglines.com
Install eGroupWare 1.4 on SME 7.x (7.2)
« Reply #119 on: August 17, 2007, 09:28:17 AM »
hi,

i tried installing the eGroupWare 1.4 on sme 7.2, one of the problem i encounter is the "Tracking System", i can view but when i add i just get blank or empty page. any one can help me?

thanks,
Nef Kho  :-) .........