Koozali.org: home of the SME Server

[Announce] Horde 3.1.x RPM's

Offline calisun

  • *
  • 601
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #60 on: February 19, 2007, 07:51:50 AM »
John
I have installed: smeserver-gollem.noarch 0:1.0-12
Works like a charm,
thanks.
SME user and community member since 2005.
Want to install Wordpress in iBay of SME Server?
See my step-by-step How-To wiki here:
http://wiki.contribs.org/Wordpress_Multisite

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #61 on: February 26, 2007, 07:37:21 PM »
John;

I wanted to give this a whirl and the best instructions I could find in the thread was in quotes below. You do not mention the pear*.rpms that are on your site. I am running an SME V7 that has been updated to 7.1. Are the pear*.rpms obsolete?

Does it matter which order I install them in?

Thx in advance for your help.

Quote
I did this today. I installed sme7, added 10 users, sent email from each of the 10 users to at least 3 other users, yum update, post-upgrade; reboot, checked server-manager, users fine. Then I logged in to webmail again as each user, no issues. Downloaded the RPMS from my contribs site, checked the md5sums and they matched. Installed the 10 RPMS you should have:
e-smith-horde-1.13.0-15.noarch.rpm
imp-h3-4.1.3-00sme01.noarch.rpm
e-smith-imp-1.13.0-07.noarch.rpm
ingo-h3-1.1.2-00sme01.noarch.rpm
smeserver-kronolith-1.1-5.noarch.rpm
e-smith-ingo-1.1-5.noarch.rpm
kronolith-h3-2.1.4-00sme01.noarch.rpm
turba-h3-2.1.3-00sme01.noarch.rpm
e-smith-turba-1.7.0-08.noarch.rpm
horde-3.1.3-00sme01.noarch.rpm

post-upgrade and reboot. Checked server-manager, no issues with users, added users free/busy information via server-manager (this must be done in order to be able to query a users calendar), logged in as users, created default identities. Opened Kronolith and added events and invited users.

You error about a horde VFS tells me that either you had an error when doing the post-upgrade, or there may be a templates-custom fragment.

Your /var/log/messages should show any of these errors. If you don't have it, do a signal-event post-upgrade again and then browse your log before you do the reboot.

John

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
[Announce] Horde 3.1.x RPM's
« Reply #62 on: February 26, 2007, 07:51:12 PM »
Quote from: "imcintyre"
John;

I wanted to give this a whirl and the best instructions I could find in the thread was in quotes below. You do not mention the pear*.rpms that are on your site. I am running an SME V7 that has been updated to 7.1. Are the pear*.rpms obsolete?

Does it matter which order I install them in?

Thx in advance for your help.

Quote
I did this today. I installed sme7, added 10 users, sent email from each of the 10 users to at least 3 other users, yum update, post-upgrade; reboot, checked server-manager, users fine. Then I logged in to webmail again as each user, no issues. Downloaded the RPMS from my contribs site, checked the md5sums and they matched. Installed the 10 RPMS you should have:
e-smith-horde-1.13.0-15.noarch.rpm
imp-h3-4.1.3-00sme01.noarch.rpm
e-smith-imp-1.13.0-07.noarch.rpm
ingo-h3-1.1.2-00sme01.noarch.rpm
smeserver-kronolith-1.1-5.noarch.rpm
e-smith-ingo-1.1-5.noarch.rpm
kronolith-h3-2.1.4-00sme01.noarch.rpm
turba-h3-2.1.3-00sme01.noarch.rpm
e-smith-turba-1.7.0-08.noarch.rpm
horde-3.1.3-00sme01.noarch.rpm

post-upgrade and reboot. Checked server-manager, no issues with users, added users free/busy information via server-manager (this must be done in order to be able to query a users calendar), logged in as users, created default identities. Opened Kronolith and added events and invited users.

You error about a horde VFS tells me that either you had an error when doing the post-upgrade, or there may be a templates-custom fragment.

Your /var/log/messages should show any of these errors. If you don't have it, do a signal-event post-upgrade again and then browse your log before you do the reboot.

John


The pear rpms are needed if you plan to compose messsges via html in imp.  Since SME Server 7.1 includes horde, imp, turba, ingo, you will no longer find those rpm's on my contribs site.  The only order is that the main package needs to be installed before the smeserver package.

John
......

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #63 on: February 27, 2007, 12:01:24 AM »
By the "main package" do you mean the rpms without smeserver as the prefix (just want to get this right), then the pears and then the smeserver stuff?

Thx

Quote
gollem-h3-1.0.2-1.noarch.rpm                                           03-Dec-2006 18:22  759K  
 kronolith-h3-2.1.4-00sme01.noarch.rpm                                  04-Dec-2006 17:24  1.6M  
 mimp-h3-1.0-1.noarch.rpm                                               03-Dec-2006 18:22  487K  
 mnemo-h3-2.1.1-00sme01.noarch.rpm                                      03-Dec-2006 18:25  1.2M  
 nag-h3-2.1.2-00sme01.noarch.rpm                                        03-Dec-2006 18:21  1.3M  
 pear-http_request-1.4.0-00sme.noarch.rpm                               15-Dec-2006 22:25   16K  
 pear-net_socket-1.0.6-00sme.noarch.rpm                                 03-Dec-2006 18:22  5.9K  
 pear-net_url-1.0.14-00sme.noarch.rpm                                   03-Dec-2006 18:22  6.7K  
 smeserver-gollem-1.0-12.noarch.rpm                                     01-Feb-2007 23:50   23K  
 smeserver-kronolith-1.1-6.noarch.rpm                                   28-Dec-2006 02:07   53K  
 smeserver-mimp-1.0-11.noarch.rpm                                       03-Dec-2006 18:22   28K  
 smeserver-mnemo-1.1-2.noarch.rpm                                       03-Dec-2006 18:20   24K  
 smeserver-nag-1.1-3.noarch.rpm                                         03-Dec-2006 18:21   26K  
 smeserver-trean-0.1-3.1.noarch.rpm                                     03-Dec-2006 18:22   19K  
 trean-0.1-0.noarch.rpm          

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
[Announce] Horde 3.1.x RPM's
« Reply #64 on: February 27, 2007, 04:39:05 AM »
Quote from: "imcintyre"
By the "main package" do you mean the rpms without smeserver as the prefix (just want to get this right), then the pears and then the smeserver stuff?

Thx

Quote
gollem-h3-1.0.2-1.noarch.rpm                                           03-Dec-2006 18:22  759K  
 kronolith-h3-2.1.4-00sme01.noarch.rpm                                  04-Dec-2006 17:24  1.6M  
 mimp-h3-1.0-1.noarch.rpm                                               03-Dec-2006 18:22  487K  
 mnemo-h3-2.1.1-00sme01.noarch.rpm                                      03-Dec-2006 18:25  1.2M  
 nag-h3-2.1.2-00sme01.noarch.rpm                                        03-Dec-2006 18:21  1.3M  
 pear-http_request-1.4.0-00sme.noarch.rpm                               15-Dec-2006 22:25   16K  
 pear-net_socket-1.0.6-00sme.noarch.rpm                                 03-Dec-2006 18:22  5.9K  
 pear-net_url-1.0.14-00sme.noarch.rpm                                   03-Dec-2006 18:22  6.7K  
 smeserver-gollem-1.0-12.noarch.rpm                                     01-Feb-2007 23:50   23K  
 smeserver-kronolith-1.1-6.noarch.rpm                                   28-Dec-2006 02:07   53K  
 smeserver-mimp-1.0-11.noarch.rpm                                       03-Dec-2006 18:22   28K  
 smeserver-mnemo-1.1-2.noarch.rpm                                       03-Dec-2006 18:20   24K  
 smeserver-nag-1.1-3.noarch.rpm                                         03-Dec-2006 18:21   26K  
 smeserver-trean-0.1-3.1.noarch.rpm                                     03-Dec-2006 18:22   19K  
 trean-0.1-0.noarch.rpm          


Yes, that is what I mean.  You don't have to install trean, it's a bookmark manager, or gollem, it a file-manager if you don't want to.

John
......

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #65 on: February 28, 2007, 04:12:47 AM »
John;

I got everything installed and appears to be working fine on local network. I will try from outside tomorrow while at work. Should be ok as Horde was working before.

Re the shared address books, I tried to follow the bug report and your comments:
Quote
First, in conf.php, edit this line - $conf['shares']['source'] = 'sql'; and change to localsql, then edit sources.php and change 'use_shares' => false, to true

but don't know how to find the conf.php file or the sources.php file. If you could give me a nudge  :oops:  in the correct direction I would appreciate it. After that I assume it is a pico or MC affair to edit the files.

Thx again and much appreciated, from what I see, this suit my purposes.

Ian

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
[Announce] Horde 3.1.x RPM's
« Reply #66 on: February 28, 2007, 04:45:15 AM »
Quote from: "imcintyre"
John;

I got everything installed and appears to be working fine on local network. I will try from outside tomorrow while at work. Should be ok as Horde was working before.

Re the shared address books, I tried to follow the bug report and your comments:
Quote
First, in conf.php, edit this line - $conf['shares']['source'] = 'sql'; and change to localsql, then edit sources.php and change 'use_shares' => false, to true

but don't know how to find the conf.php file or the sources.php file. If you could give me a nudge  :oops:  in the correct direction I would appreciate it. After that I assume it is a pico or MC affair to edit the files.

Thx again and much appreciated, from what I see, this suit my purposes.

Ian


If you update to 7.1.1, then all you have to do is - config setprop horde SharedAddressBooks enabled ; signal-event email-update.

John
......

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #67 on: March 01, 2007, 05:11:56 AM »
John;

I'm still not getting this correctly and I am not sure where the problem lies.
I ran the most recent upgrades through the SEM Server Panel and pushed the reconfigure button. I was at 7.1, I assume that I should be at 7.1.1 although at the bottom of the SME Server page/panel, it lists the version as 7.1 (?)

I puttyed in as root and at the prompt ran

Code: [Select]
config setprop horde SharedAddressBooks enabled

then I ran
Code: [Select]
signal-event email-update

I then reopened Horde and could not find a way to create or share contact lists.

Any help you can lend would be appreciated?

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
[Announce] Horde 3.1.x RPM's
« Reply #68 on: March 01, 2007, 05:21:07 AM »
Click on address book, and you should have a My Address Books icon on the top left.
......

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #69 on: March 01, 2007, 06:42:58 PM »
Nope I am definitely not getting it.

I was using IEv7 to https in. I just tried Firefox 2.0.0.2 with same result.

I updated through the SME Server panel at about 6:00 am EST but still list SME Version 7.1 not 7.1.1 as you mentioned in previous post. Is this a/the glitch. I am updating from SME Server - addons;os;updates as well as  CentOS- os;updates but not SME Server - updates testing

I am not sure how to hunt down the problem and would appreciate your help.

What info do I need to get? Thx in advance.

Ian

Offline mrjhb3

  • *
  • 1,188
  • +0/-0
    • John Bennett Services
[Announce] Horde 3.1.x RPM's
« Reply #70 on: March 01, 2007, 07:07:45 PM »
Quote from: "imcintyre"
Nope I am definitely not getting it.

I was using IEv7 to https in. I just tried Firefox 2.0.0.2 with same result.

I updated through the SME Server panel at about 6:00 am EST but still list SME Version 7.1 not 7.1.1 as you mentioned in previous post. Is this a/the glitch. I am updating from SME Server - addons;os;updates as well as  CentOS- os;updates but not SME Server - updates testing

I am not sure how to hunt down the problem and would appreciate your help.

What info do I need to get? Thx in advance.

Ian


What I have told you will only work when you have 7.1.1 installed.  Or, you install the new turba rpm from smeupdates.  If you did install updates, then signal-event post-upgrade ; signal-event reboot or reconfiguration from the server-manager panel and still show 7.1, then I don't know what you updated.

There have been some issues with the mirrors not being in sync.

John
......

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #71 on: March 01, 2007, 07:38:25 PM »
John;

Thx for quick response. There seems to be an issue when sending out email notifications for meetings that the ICalendar attachment promised is not there. It may be an Outlook blocking issue, I don't know. I will keep trying to resolve this and updating. if you have any insight into the Icalendar attachment thing let me know, I am looking through the Horde wiki for hints also.

Ian

Offline imcintyre

  • *
  • 609
  • +0/-0
[Announce] Horde 3.1.x RPM's
« Reply #72 on: March 07, 2007, 06:29:42 PM »
John;

With the generous help of others, william_syd in particular, I have my update working again and have been able to implement all discussed here.

Thx again.

Ian

Offline lucho115

  • ****
  • 209
  • +0/-0
    • http://www.elac.com.ar
[Announce] Horde 3.1.x RPM's
« Reply #73 on: March 27, 2007, 09:30:00 PM »
mrjhb3
Quote
I'm pretty sure you can have a signup page. Do - config setprop horde Administration enabled ; signal-event email-update
then login to horde as admin and look at the horde setup screen and make the appropriate changes. Click save or generate config, you will get an error that you can't save, but you will be able to see what additions you need to make in your custom templates.


I enable horde Administration, but i cant see the way to config a singup page, can you tell me how to doit?
thks

Offline Agent86

  • ****
  • 592
  • +0/-0
    • http://www.iclbiz.com
Re: [Announce] Horde 3.1.x RPM's
« Reply #74 on: February 25, 2008, 02:13:24 PM »
Anyone Please confirm this topic.

I already have 7.1.1 installed. and the associated RPM's working perfectly.
I am wondering for shared addressbook do I still need to:
Code:
Quote
First, in conf.php, edit this line - $conf['shares']['source'] = 'sql'; and change to localsql, then edit sources.php and change 'use_shares' => false, to true
and
Code:
Quote
config setprop horde SharedAddressBooks enabled

Or just
Code:
Quote
config setprop horde SharedAddressBooks enabled

I've tried just:
Code:
Quote
config setprop horde SharedAddressBooks enabled
And cannot seem to find anything which will let me share addressbook ?
Does it let me share addressbook with users I desire to share with or just share in general globally.


???
Please confirm this subject, thanks

 
« Last Edit: February 26, 2008, 03:55:47 AM by Agent86 »