Koozali.org: home of the SME Server

Si alguien entiende español por favor .. necesito ayuda

arielf

Si alguien entiende español por favor .. necesito ayuda
« on: April 08, 2006, 05:48:01 PM »
En la empresa antiguamente habia un proxy configurado escuchando en el puerto 80
todos los navegadores estan configurados en el puerto

Necesito saber la forma de que esl squid del SME 7 , escuche en el puerto 80 y NO en el 3821

Gracias

Offline CharlieBrady

  • *
  • 6,918
  • +3/-0
Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #1 on: April 08, 2006, 06:35:45 PM »
Quote from: "arielf"
En la empresa antiguamente habia un proxy configurado escuchando en el puerto 80
todos los navegadores estan configurados en el puerto

Necesito saber la forma de que esl squid del SME 7 , escuche en el puerto 80 y NO en el 3821


squid en SME 7 es escuchando el puerto 80 y tambiem en el 3821. el es configurado como "transparent proxy". Busca en google por mas informaciones.

Claro?

arielf

Gracias por contestar
« Reply #2 on: April 09, 2006, 02:18:55 PM »
Pero yo necesito que cuando en los navegadores pongan

10.10.10.10 : 80  puedan navegar  hoy solo lo hacen si apuntan al ip y al port 3128


Gracias

Offline jfarschman

  • *
  • 406
  • +0/-0
Si alguien entiende español por favor .. necesito ayuda
« Reply #3 on: April 10, 2006, 01:51:31 PM »
Arielf,

  Pienso que el problema es puertos seguros. Look at this:

# db configuration show squid

squid=service
    EnforceSafePorts=no
    SafePorts=21,70,80,81,119,210,443,563,980,1024-65535
    TCPPort=3128
    TCPProxyPort=80:3128
    TransparentPort=3128
    access=private
    status=enabled

Apagado a los puertos seguros para 80:

db configuration setprop squid SafePorts \
21,70,81,119,210,443,563,980,1024-65535
expand-template /etc/squid/squid.conf
signal-event remoteaccess-update

Espero que esto trabaje.
Jay Farschman
ICQ - 60448985
jay@hitechsavvy.com

arielf

Gracias.. por tu ayuda -- Te hago una ultima consulta ..
« Reply #4 on: April 10, 2006, 07:12:23 PM »
Primero te agradezco que me hayas contestado, hoy voy a probar las conf  que me dices y veo que pasa.

Otra consulta ,, Sabes si existe forma de que pueda dar en el dhcp  ip reservadas, o sea fijas ,, no dinamicas.
Actualmete con otro dhcp, yo tengo todos los ip cargados en dhcp.conf, de forma reservada , con su mac e ip, de esta forma siempre le entrega la misma ip

Gracias.

Offline cactus

  • *
  • 4,880
  • +3/-0
    • http://www.snetram.nl
Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #5 on: April 10, 2006, 07:22:19 PM »
Quote from: "arielf"
En la empresa antiguamente habia un proxy configurado escuchando en el puerto 80
todos los navegadores estan configurados en el puerto

Necesito saber la forma de que esl squid del SME 7 , escuche en el puerto 80 y NO en el 3821

Gracias

As the language on this forum is Englsih... would you be so nice to ask your question in English (as well) the next time?
Be careful whose advice you buy, but be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than its worth ~ Baz Luhrmann - Everybody's Free (To Wear Sunscreen)

Offline gregswallow

  • *
  • 651
  • +1/-0
Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #6 on: April 10, 2006, 08:22:34 PM »
Quote from: "cactus"
As the language on this forum is Englsih... would you be so nice to ask your question in English (as well) the next time?


As there is no Spanish forum, perhaps you could relax and give the guy a break.  

arielf, I will create a spanish forum.  Apparently there are some Spanish translations that need to be updated for SME 7.0, so more Spanish speaking users (and translators) would be great.

ToniB

Re: Gracias.. por tu ayuda -- Te hago una ultima consulta ..
« Reply #7 on: April 11, 2006, 05:21:42 PM »
Quote from: "arielf"
Primero te agradezco que me hayas contestado, hoy voy a probar las conf  que me dices y veo que pasa.

Otra consulta ,, Sabes si existe forma de que pueda dar en el dhcp  ip reservadas, o sea fijas ,, no dinamicas.
Actualmete con otro dhcp, yo tengo todos los ip cargados en dhcp.conf, de forma reservada , con su mac e ip, de esta forma siempre le entrega la misma ip

Gracias.


Hola arielf. No soy un experto en SME 7.x - Pero te diré que en todas las versiones SME se ha podido realizar sin complicaciones un DHCP particular. Como poco, se puede reservar una zona para DHCP automático y el resto tener los demás con ip fija fuera de esa zona.
Por cierto, si este es un foro español, se tendrá que hablar en español ¿?
Saludos

Anonymous

Si alguien entiende español por favor .. necesito ayuda
« Reply #8 on: April 11, 2006, 10:16:32 PM »
Ariel,

  Primero, me Espanol es malo, pero usted puede hacer DHCP da fuera de un IP reservadas usando la forma de Hostnames. Apenas puesto en el MAC address y el IP reservadas.... Emparejara siempre el MAC al IP.

  I hope this helps.  Espero que esto ayude.

Offline jfarschman

  • *
  • 406
  • +0/-0
Si alguien entiende español por favor .. necesito ayuda
« Reply #9 on: April 11, 2006, 10:17:47 PM »
Soy la Guest
Jay Farschman
ICQ - 60448985
jay@hitechsavvy.com

psykoben

Si alguien entiende español por favor .. necesito ayuda
« Reply #10 on: May 06, 2006, 10:10:11 AM »
Ariel

Tengo muy malo castellano, lo siento, estoy trabajando esto   :hammer:

Tengo tanbien 2 computadores con IP fija allocadas en DHCP por la SME(6)

Para hacer eso tienes que reservar IP al exterior de la playa de allocacion dynamica (ssh con admin user, configuracion del DHCP)

exemplo IP dynamica 192.168.1.10 hasta 192.168.1.50 (depende del nombre de computadores en local)

Despues tienes que crear un host en el server-manager a la rubrica hostnames and address

exemplo
hostname: mamachine.mondomaine.com
visibilité : local
emplacement: local
IP local: 192.168.1.60  (<=out of 192.168.1.10 hasta 192.168.1.50)
IP globale:
adresse ethernet: xx:xx:xx:xx:xx:xx <= hardware adress del adaptador ethernet del computador con IP fija

ya esta

esperando que ayuda y feliz de tener spanish forum (para practicar un poco

 :lol: )

alejandro

Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #11 on: May 09, 2006, 05:44:28 AM »
Quote from: "cactus"
Quote from: "arielf"
En la empresa antiguamente habia un proxy configurado escuchando en el puerto 80
todos los navegadores estan configurados en el puerto

Necesito saber la forma de que esl squid del SME 7 , escuche en el puerto 80 y NO en el 3821

Gracias

As the language on this forum is Englsih... would you be so nice to ask your question in English (as well) the next time?


Maybe not all people here speaks "englsih"....

Thanks Greg for this forum!!!
and I'm glad to see there are a lot of enthusiastic spanish writers!

Offline lightman

  • ***
  • 75
  • +0/-0
Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #12 on: May 11, 2006, 01:15:32 AM »
Quote from: "gregswallow"

As there is no Spanish forum, perhaps you could relax and give the guy a break.  

arielf, I will create a spanish forum.  Apparently there are some Spanish translations that need to be updated for SME 7.0, so more Spanish speaking users (and translators) would be great.


Hi gregswallow

I can traslate from english to spanish quite well (I usually do subtitles for a TV series forum, just 4 fun :) so maybe I can help if it's needed )

I don't know if you need to translate something of the SME server to spanish, if I can help with this, I will be glad to, please contact me if that is the case.

I don't have a great deal of time but I think I can dedicate 2 or 3 hours a week for this. :-D

thanks
Lightman

[Me estoy ofreciendo para traducir--^--lo que haga falta del SME, no se si necesitaran gente pero veo que hay varias personas de habla hispana por aqui asi que podria ser util, saludos]

rootero

Re: Si alguien entiende español por favor .. necesito ayuda
« Reply #13 on: February 10, 2007, 07:10:58 PM »
Quote from: "arielf"
En la empresa antiguamente habia un proxy configurado escuchando en el puerto 80
todos los navegadores estan configurados en el puerto

Necesito saber la forma de que esl squid del SME 7 , escuche en el puerto 80 y NO en el 3821

Gracias


Tenes que editar el archivo /etc/squid.conf
Solo comenta el que viene por default:
# http_port 3128
Para tu proxy seria el puerto 80
http_port 80

Tenes que detener el servicio en consola
service squid stop
Cuando terminaste de hacer los cambios,
service squid start