Hello Tib,
Glad you like 162.
I have a problem where sometimes when ppl on the outside line hang up the pstn line does not
This is not a SAIL problem per se. It is an asterisk problem (ish). What you are seeing is asterisk not recognising what is called a "far-end disconnect". In other words, when the far end phone goes on-hook, asterisk is not being notified. Now, different carriers notify far end disconnect in different ways. Some old fashioned carriers will put a polarity reversal onto the line (very rare nowadays), more commonly they will use CPC (Calling Party Control) which is characterised by a momentary drop in line voltage (usually between 9 and 20 milliseconds). Some others will give a busy DTMF tone others will give a montone and others, give nothing at all.
Now, I believe you are using a Sipura 3000 to connect to your PSTN and it is here that your problem lies. The spa3K is, for whatever reason, not detecting the far end hang-up. You will probably need to look up the correct disconnect settings for your carrier (there are lots of Forums dedicated to the spa3K and it's many foibles). It may be that you may have to ask your carrier to supply you with disconnect supervision (CPC), some charge for the privilege.
I fixed the conference rooms qty on last ver ... since the update I only have one conf room again
Yeah, we rolled the new realease with one of the PC's uncommitted to SVN. It should be OK in 165.
Apr 7 20:44:48 NOTICE[3521]: chan_iax2.c:5676 update_registry: Restricting registration for peer '5003' to 60 seconds (requested 1200)
Asterisk won't allow an IAX user to register for more than 60 seconds (don't know why). The message is benign. However if you want it to go away set maxexpiry=60 in the friend definition for the phone.
speed-dial
This is a fault Tib, we're working on it.
Kind Regards
Selintra