Topic: [Announce] RPM's for Kronolith, Nag, Mnemo, and Gollem

[brianr]

You have to enable ftp via server-manager for gollem to work.  Look at the logs at /var/log/messages while you use gollem, it should be evident if you have an issue as to what to do.  

John

ok, I re-expanded the gollem/backends.php specifically (although I did do an email-update, as per your earlier instructions), and then fixed a problem where the local ftp.domain was redirected to another PC (can't remeber why..), and it works now!!  Thanks.

[mrjhb3]

My rpms where downloaded this afternoon.

I have found the registry.php and editted it,. and I get the mimp icon and then the username and password request on the webmail, but it does not correctly authenticate, /var/log/messages shows:

Sep 11 20:42:14 bjsserver ;сский)[4530]: PHP
Warning:  Unterminated comment starting line 15 in /home/httpd/html/horde/mimp/c
onfig/servers.php on line 15
Sep 11 20:42:25 bjsserver ![4530]: PHP Warning:  Unterminated comment starting l
ine 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:25 bjsserver ![4530]: PHP Warning:  Invalid argument supplied for f
oreach() in /home/httpd/html/horde/mimp/redirect.php on line 63
Sep 11 20:42:26 bjsserver [4530]: PHP Warning:  Unterminated comment starting li
ne 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:38 bjsserver ¸&Ç   [4530]: PHP Warning:  Unterminated comment start
ing line 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:38 bjsserver ¸&Ç   [4530]: PHP Warning:  Invalid argument supplied
for foreach() in /home/httpd/html/horde/mimp/redirect.php on line 63
Sep 11 20:42:39 bjsserver full[4530]: PHP Warning:  Unterminated comment startin
g line 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15

Then that confirms that the old RPM was still there.  You should be able to correct this yourself, by looking at line 15 of the file mentioned above and making the necessary change there and in the templates portion so the change isn't lost if you make other email changes.

As soon as the mirrors sync, there will be quite a few updated RPM's as I decided to move some of the items that I was trying to get included in the base, made into their own RPM's.

JB

[brianr]

ok, as you say I "fixed" that so that "mobile mail" icon works on the webmail, but I still can;t get to it from my phone, I get the "full" version.

I am accessing it by whatever.trl/webmail. Should i use a different foldername. or perhaps pre-pend some sort of  "https" replacement to indicate it is a wap access?

[mrjhb3]

ok, as you say I "fixed" that so that "mobile mail" icon works on the webmail, but I still can;t get to it from my phone, I get the "full" version.

I am accessing it by whatever.trl/webmail. Should i use a different foldername. or perhaps pre-pend some sort of  "https" replacement to indicate it is a wap access?

You are seeing the same thing I am.  Mimp is a WIP for me since I can not fully test it.  I've tried hitting it via some WAP browsers, but I can never get them to connect although I see the request come in via the httpd logs.  To me, it looks like it has something to do with using https vs. http, but I can't confirm that.  

If you really want to help troubleshoot this, I would suggest joining the mimp list (pretty low activity) at horde.org and asking questions there as well as looking through the mail archives for any other solutions.  Or, everyone can continue to wait until I find the time and I'll do the asking and searching.

JB

[calisun]

John,
This morning (9/13/06 @ 9:00AM PST) I did a fresh install of SME7 final. After install, I downloaded and installed all your RPM's. After reconfigure and reboot, I am unable to use file manager, just like I have described earlier on an upgraded server. When I click on "file manager" I see a "login" button. When I click on login button, the screen goes blank for a split second and I get the login button again. Yes, ftp is set to allow access from local networks.

Could the issue be me trying to access it from WAN? This server is set up strickly as a web server, so it is not connected to lan.

[mrjhb3]

John,
This morning (9/13/06 @ 9:00AM PST) I did a fresh install of SME7 final. After install, I downloaded and installed all your RPM's. After reconfigure and reboot, I am unable to use file manager, just like I have described earlier on an upgraded server. When I click on "file manager" I see a "login" button. When I click on login button, the screen goes blank for a split second and I get the login button again. Yes, ftp is set to allow access from local networks.

Could the issue be me trying to access it from WAN? This server is set up strickly as a web server, so it is not connected to lan.

Here is all I can think of:
What do you see in /var/log/messages when you click on the login button?  
You could change the backends.php file from your domain name to localhost and see if that works.  
What are you using for DNS?  It could be that using the domain name in the backends.php file is failing because the server can't resolve that and changing it to localhost may resolve it.

I simply can not duplicate this issue.  I have used my domain and localhost in testing.  I can use file manger from my private and public side of my webserver.

John

[calisun]

I have not specified a DNS server as suggested by install since SME can resolve locally.

 
here is what I get in log files

Sep 13 10:12:09 mml HORDE[4626]: [imp] Login success for my-name@my-domain.com [##.##.###.##] to {localhost:143} [on line 150 of "/home/httpd/html/horde/imp/redirect.php"]
Sep 13 10:12:20 mml HORDE[4626]: [gollem] ##.##.###.## Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]

[mrjhb3]

I have not specified a DNS server as suggested by install since SME can resolve locally.

 
here is what I get in log files

Sep 13 10:12:09 mml HORDE[4626]: [imp] Login success for my-name@my-domain.com [##.##.###.##] to {localhost:143} [on line 150 of "/home/httpd/html/horde/imp/redirect.php"]
Sep 13 10:12:20 mml HORDE[4626]: [gollem] ##.##.###.## Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]

Any other contribs on this server?  You didn't mention any, so I presume no.
From the server console, can you ftp ftp.yourdomain.com and login as the user you are logged into via webmail?  Also try ftp localhost.
Also what about changing gollem/config/backends.php to localhost.

John

[calisun]

searching for gollem/config/backends.php
I found it in several locations:

./etc/e-smith/templates.metadata/home/httpd/html/horde/gollem/config/backends.php

./etc/e-smith/events/email-update/templates2expand/home/httpd/html/horde/gollem/config/backends.php

./etc/e-smith/events/bootstrap-console-save/templates2expand/home/httpd/html/horde/gollem/config/backends.php

./etc/e-smith/events/bootstrap-console-save/templates2expand/home/httpd/html/horde/ingo/config/backends.php

./home/httpd/html/horde/gollem/config/backends.php


Which one did you want me to change? I am assuming the last one since the others are templates, but I am checking with you before I assume wrong.

[mrjhb3]

searching for gollem/config/backends.php
I found it in several locations:


./home/httpd/html/horde/gollem/config/backends.php

Yes, the others have to do with what templates get expanded when a particular signal-event is run and what default permissions to put on the directory.

John

[calisun]

I have changet to:

'hostspec' => 'ftp.localhost',

no effect
Do I need to leave ftp. in there or just localhost?

[calisun]

I have change it to:

'hostspec' => 'localhost',

and it works,
thanks John

[mrjhb3]

I have change it to:

'hostspec' => 'localhost',

and it works,
thanks John

   Very good to hear.  It may be best just to leave that set to localhost, which is probably what I will do.

John

[calisun]

Will this change get overwritten next time I reconfigure the server?

[calisun]

John,
When users log into file manager "gollem" they are presented with:

folder      .ssh            
folder     home          
folder     Maildir          
file         .qmail    
file        .qmail-junkmail    
symlink     .qmail-default

Is there a way to have them connect to home folder directly? I don't want them to mess with all the other files and cause problems by changing or deleting system files.


Also, as I remeber, last time I installed your RPM's admin had an admin tab, I don't see that this time.