Topic: [Announce] RPM's for Kronolith, Nag, Mnemo, and Gollem

[calisun]

John, here is info from log file right after tying to use file manager.

Aug  3 19:45:47 smeserver HORDE[17634]: [imp] FAILED LOGIN 192.168.1.248 to localhost:143[imap/notls] as admin [on line 237 of "/home/httpd/html/horde/imp/lib/Auth/imp.php"]
Aug  3 19:45:59 smeserver HORDE[17634]: [imp] Login success for admin@mytestserver.com [192.168.1.248] to {localhost:143} [on line 150 of "/home/httpd/html/horde/imp/redirect.php"]
Aug  3 19:46:28 smeserver HORDE[17635]: [gollem] 192.168.1.248 Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]
Aug  3 19:46:33 smeserver HORDE[17634]: [gollem] 192.168.1.248 Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]

[mrjhb3]

JB,

Happy to report another successful install (although got the same problem with file-manager that has already been reported).

My question is a little different & I'm not sure if you can help, but ....

I've just updated my cyrus-imap contrib for sme7 (see http://forums.contribs.org/index.php?topic=33072.msg140466#msg140466).  I use this contrib in conjuction with a commercial product called Toltec connector to enable users who run Outlook to share folders (calendar, contacts etc) via SME, rather than needing Exchange.

I saw this contrib, but don't know enough about cyrus, except you can add quota stuff to horde.  Haven't used Toltec either.  What does cyrus give you that doveot doesn't?

The latest release of the connector stores its data in Kolab2 XML format, which it claims can then be read by compatible clients to provide web access to the data.  According to the Kolab site, Horde is one of the compatible clients (albeit under development - see http://www.kolab.org/about-kolab-clients.html).

I've installed your contrib, which works well - but do you have any idea how I tell Kronilith to look at a user IMAP folder and interpret the messages there as XML calendar entries?

I do not know how to do this.  You will get better answers by posting on the horde kronolith list.

I guess you must be busy with your own contrib - but if you (or anyone else) has any suggestions where I should start looking, I'd be grateful.

Yes, I have been busy with these contribs.  I currently have enabled kronolith to save free/busy information into the ldap database.  As well as patched horde to run horde-3.0.11.  I am waiting for the official rpm to be packaged from the dev server, but I am using the rpm.  So, I have a set or rpms on my contribs site and a set at home.  I currently plan on trying to get shared address books to work in horde.  I'm not sure if shared folders is suppoted in the 2.0 code base.  Then it's off to horde 3.1.x.

JB

[mrjhb3]

I just installed the mimp and e-smith-horde RPMs, but cannot see how or where to access mimp.

Can someone point me in the right direction?

OK, so by default mimp is hidden from the main webmail screen.  If you have a wap enabled phone, you should be able to go to your site /webmail and get the mimp login.  That is if you have enabled mimp and expanded the templates, because you need to use the composite driver.  I would test this more, but when I hit my site with my phone, I get the regular gui login and not the mimp login.  Don't know why as if now.  If you want to test this from your webmail client to see if you can really authenticate to mimp, then edit horde/config/registry and change the mimp setting from hidden to active, then you will see a mobile mail icon on the sidebar.

JB

[mrjhb3]

John, here is info from log file right after tying to use file manager.

Aug  3 19:45:47 smeserver HORDE[17634]: [imp] FAILED LOGIN 192.168.1.248 to localhost:143[imap/notls] as admin [on line 237 of "/home/httpd/html/horde/imp/lib/Auth/imp.php"]
Aug  3 19:45:59 smeserver HORDE[17634]: [imp] Login success for admin@mytestserver.com [192.168.1.248] to {localhost:143} [on line 150 of "/home/httpd/html/horde/imp/redirect.php"]
Aug  3 19:46:28 smeserver HORDE[17635]: [gollem] 192.168.1.248 Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]
Aug  3 19:46:33 smeserver HORDE[17634]: [gollem] 192.168.1.248 Connection to FTP server failed. [on line 49 of "/home/httpd/html/horde/gollem/login.php"]

Still can't reproduce this:  Here is a successful login and access to gollem:
Aug  3 22:12:51 www HORDE[13161]: [imp] Login success for user1@thebennetthome2.com [10.10.10.125] to {localhost:143} [on line 150 of "/home/httpd/html/horde/imp/redirect.php"]
Aug  3 22:13:17 www proftpd[13348]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - FTP session opened.
Aug  3 22:13:17 www PAM_pwdb[13348]: (ftp) session opened for user user1 by (uid=0)
Aug  3 22:13:17 www HORDE[13164]: [gollem] Login success for User user1@thebennetthome2.com [10.10.10.125] using backend hordeftp. [on line 93 of "/home/httpd/html/horde/gollem/redirect.php"]
Aug  3 22:13:17 www proftpd[13348]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - PAM(setcred): System error
Aug  3 22:13:17 www proftpd[13348]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - PAM(close_session): System error
Aug  3 22:13:17 www proftpd[13348]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - FTP session closed.
Aug  3 22:13:19 www proftpd[13352]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - FTP session opened.
Aug  3 22:13:19 www PAM_pwdb[13352]: (ftp) session opened for user user1 by (uid=0)
Aug  3 22:13:20 www proftpd[13352]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - PAM(setcred): System error
Aug  3 22:13:20 www proftpd[13352]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - PAM(close_session): System error
Aug  3 22:13:20 www proftpd[13352]: www.thebennetthome2.com (10.10.10.41[10.10.10.41]) - FTP session closed.

So, if you go to the console and type ftp localhost and ftp ftp.yourlocalserver.com|net|org, do you get the 220 ready prompt?
Can you verify your ftp settings again.  (I trust they are set for local)
And also do a rpm -qa | grep gollem so I can see what version you are using.

Is your server a new install or upgrade?  If upgrade, were you running the previous horde30 script I created?  I will know more when I load up a test server using the current public rpm's.

JB

[calisun]

ftp localhost

Connected to localhost (127.0.0.1).
220 127.0.0.1 FTP server ready



rpm -qa | grep gollem

smeserver-gollem-1.0-7
gollem-h3-1.0.2-1


This server is an upgrade

[jonroberts]

JB

Thanks for the feedback.  Didn't pick it up till now as I didn't get a notify mail.

I saw this contrib, but don't know enough about cyrus, except you can add quota stuff to horde.  Haven't used Toltec either.  What does cyrus give you that doveot doesn't?

The main thing cyrus gives is ACL control over IMAP folders.  There's a couple of reasons why this may be useful.  See last couple of posts at thread:

http://forums.contribs.org/index.php?topic=23628.0

For me, its so I can use Outlook on my destop PCs and share folders (Calendars, Contacts etc) without needing Exchange.  So I can install SME boxes with clients that would otherwise buy MS Small Business Server.

I do not know how to do this.  You will get better answers by posting on the horde kronolith list.

Thanks for the tip.  I'll give them a try.  I'm not even sure if the funtionality I need is in 3.0.x or whether its only in 3.1.x - I'll dig a little deeper.  If you do come across anything when you're looking into 3.1.x, bear me in mind ....

[mrjhb3]

ftp localhost

Connected to localhost (127.0.0.1).
220 127.0.0.1 FTP server ready



rpm -qa | grep gollem

smeserver-gollem-1.0-7
gollem-h3-1.0.2-1


This server is an upgrade

OK, loaded a new SME 7.0 server this morning and was able to use gollem with no issues.  What version was your server upgraded from and did you have any extra contribs or scripts installed?  Also, do you have any corporate DNS settings defined that may need to have an entry added to it for your local ftp server?

I'll test again after you let me know what version, etc.

JB

[calisun]

This servere has been upgraded using yum all the way from pre3
I have Sme7admin  installed and phpmyadmin

[mrjhb3]

This servere has been upgraded using yum all the way from pre3
I have Sme7admin  installed and phpmyadmin

Maybe you already stated that and I just forgot.  

I have just loaded sme 6.0, sme 6.0.1, and sme 6.5, upgraded them all the sme 7.0 final, and installed all of the horde RPM's in my contribs directory and gollem works fine.  I simply can not duplcate this.  I even disabled anonymous ftp, and changed my gollem/config/backends.php to use localhost and it works fine as well.  I'll load sme7admin from firwall-services.com and see if that changes anything.  Have you tried changing your backends.php to localhost?   Any other contribs you may of forgot about, like the dungog chroot FTP contrib?  Also, you didn't answer about how you have dns setup.  Are you using the local SME server or a corporate DNS, that will need an entry added to it?

John Bennett

[mrjhb3]

Lastly, I have loaded sme7admin on all three of the test servers I have that have been upgraded.  Gollem still works fine.  Can you try re-downloading the two gollem rpm's, removing the current ones,  and re-installing, please?  Then tail -f /var/log/messages, then do signal-event email-update watching the log to see if there are any errors.  Lastly, try gollem again.

JB

[calisun]

No luck , I have removed both gollem RPM's, downloaded new ones and reinstalled, after signal-even email-upgrade and signal-event reboot, it is back to the way it was.
Does the install order make a difference? If it does, did the way I installed it originally break something?
-----------------------------------------
wget -r -l1 -A.rpm --no-parent http://mirror.contribs.org/smeserver/contribs//jbennett/sme7/horde/RPMS/

yum localinstall *.rpm

signal-event post-upgrade

signal-event reboot
----------------------------------------

Later this week I will try do a clean istallation.

You might want to check with progitto, he reported the same problem. See if you can figure out something on his system.

[mrjhb3]

No luck , I have removed both gollem RPM's, downloaded new ones and reinstalled, after signal-even email-upgrade and signal-event reboot, it is back to the way it was.
Does the install order make a difference? If it does, did the way I installed it originally break something?
-----------------------------------------
wget -r -l1 -A.rpm --no-parent http://mirror.contribs.org/smeserver/contribs//jbennett/sme7/horde/RPMS/

yum localinstall *.rpm

signal-event post-upgrade

signal-event reboot
----------------------------------------

Later this week I will try do a clean istallation.

You might want to check with progitto, he reported the same problem. See if you can figure out something on his system.

  Damn!  I don't know what the issue could be.  I installed the RPM's the same way you did to test that as well.  I'll be interested in your clean install results.

JB

[brianr]

I just installed the mimp and e-smith-horde RPMs, but cannot see how or where to access mimp.

Can someone point me in the right direction

OK, so by default mimp is hidden from the main webmail screen. If you have a wap enabled phone, you should be able to go to your site /webmail and get the mimp login. That is if you have enabled mimp and expanded the templates, because you need to use the composite driver. I would test this more, but when I hit my site with my phone, I get the regular gui login and not the mimp login. Don't know why as if now. If you want to test this from your webmail client to see if you can really authenticate to mimp, then edit horde/config/registry and change the mimp setting from hidden to active, then you will see a mobile mail icon on the sidebar.</quote>

I also get the full gui interface when I access it from my mobile phone, despite having "enabled" it as described.  Where is the horde/registry/conf file that I need to edit  to try the icon?  I did a search in mc, but couldn't find it.

I have now installed all the horde rpms, and also cannot get ftp to work - I get the "login" request, which does not have any space for username etc, and pressing it just hangs.

[mrjhb3]

I also get the full gui interface when I access it from my mobile phone, despite having "enabled" it as described.  Where is the horde/registry/conf file that I need to edit  to try the icon?  I did a search in mc, but couldn't find it.

I have now installed all the horde rpms, and also cannot get ftp to work - I get the "login" request, which does not have any space for username etc, and pressing it just hangs.

You have to enable ftp via server-manager for gollem to work.  Look at the logs at /var/log/messages while you use gollem, it should be evident if you have an issue as to what to do.  For mimp edit horde/registry.php and change from hidden to active and you will have an icon in the sidebar.  There was an issue with a missing character in the mimp rpm that I have corrected, that I believe I previoulsy updated, but I made some other changes this weekend, but the mirrors are not yet in sync.

John

[brianr]

 For mimp edit horde/registry.php and change from hidden to active and you will have an icon in the sidebar.  There was an issue with a missing character in the mimp rpm that I have corrected, that I believe I previoulsy updated, but I made some other changes this weekend, but the mirrors are not yet in sync.

My rpms where downloaded this afternoon.

I have found the registry.php and editted it,. and I get the mimp icon and then the username and password request on the webmail, but it does not correctly authenticate, /var/log/messages shows:

Sep 11 20:42:14 bjsserver ;&#x0441;&#x0441;&#x043a;&#x0438;&#x0439;)[4530]: PHP
Warning:  Unterminated comment starting line 15 in /home/httpd/html/horde/mimp/c
onfig/servers.php on line 15
Sep 11 20:42:25 bjsserver ![4530]: PHP Warning:  Unterminated comment starting l
ine 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:25 bjsserver ![4530]: PHP Warning:  Invalid argument supplied for f
oreach() in /home/httpd/html/horde/mimp/redirect.php on line 63
Sep 11 20:42:26 bjsserver [4530]: PHP Warning:  Unterminated comment starting li
ne 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:38 bjsserver ¸&Ç   [4530]: PHP Warning:  Unterminated comment start
ing line 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15
Sep 11 20:42:38 bjsserver ¸&Ç   [4530]: PHP Warning:  Invalid argument supplied
for foreach() in /home/httpd/html/horde/mimp/redirect.php on line 63
Sep 11 20:42:39 bjsserver full[4530]: PHP Warning:  Unterminated comment startin
g line 15 in /home/httpd/html/horde/mimp/config/servers.php on line 15