Topic: Asterisk on SME7 (me again)

[kangkc]

That's what I did. It's a fresh SME7 RC1 installation without any contribs or addon.

Install A4SME7, upon verifying that Asterisk is running, download 2.7 and run install_sme.sh

At the end of the installation and reboot, Asterisk failed to start.

I may just try 2.6 and see how it goes.

[kangkc]

Just tried 2.6, same result as 2.7.

Tib, anything I must change or do to get the install_SME.sh working after successful installtion of A4SME7 ? Things like Software Installer options, or install script?

It's a fresh SME7 RC1 installation fresh from the oven.

[Tib]

Hi kangkc,
You have to enable all the yum update sites described in the firewall-services.com setup ... install it then once you check everything out  enable all the yum update sites in the asterisk help file then install that one.

I haven't got it installed on my system any longer but I will try and install it onto my test server over the weekend.

just remember every time you re-boot your server the yum repositories revert back to default ... as they should.

Read the instructions from the asterisk site ... if you down load the zip version and unzip it you will find it in there ... I can't remember where exactly but it's there.

When I get home from work I will have a look.

Regards,

Tib

[Tib]

Hello,

Haven't had a chance to load it up on my test machine yet ... but one thing comes to mind.

did you create an aah_load dir under /var and untar all the files into that dir.

[edit]

I just checked one of the notes files ... you have to make a dir as I stated above ... copy the file to that dir and then do ...  tar xvfz asteriskathome-2.7.tar.gz ... then sh install_sme.sh

[edit]

that part is a must I think ... I remember reading it in the howto install part.

I will try to load it on soon.

Regards,

Tib

[Tib]

kangkc

Check this tread out ... someone has figured out the setp for asterisk.

http://forums.contribs.org/index.php?topic=31446.0

So now you don't have to load on A4SME7 ... just load on the latest asterisk.

I'll have to test that installation out on my test server as well.

Regards,

Tib

[kangkc]

Hi Tib,

Any luck on your end.

Doesn't seem too good here. I have tried 2.8beta1, have a few errors on FOP and Maintenance Screen. It's was lat night so didn't look at the install log to find out the cause.

Tried 2.7 as well and Asterisk doesn't come up.

I guess I may spend the weekend going through the install log and solve the problem one at a time.

Or I may just use Selintra rpms which works pretty well for a basic VoIP setup.

[Tib]

kangkc

Sorry I haven't had time to re try this install ... I'll have to re-load SME7 and then try the latest setup ... some one has already modified the script to suit the SME7 a bit better

http://forums.contribs.org/index.php?topic=31446.0

Might want to try that one as well.

I'm using the Sail one for my home use.

Regards,

Tib

[RvLardin]

I suggest that we move from this forum to the "SME7-contribs", for this thread.
Let's continue on the discussion under :
http://forums.contribs.org/index.php?topic=31446.0

A+,
RV.