Hello all. I have 2 e-smith boxes. One with a dedicated ip the other dhcp behind a dls modem set in gateway mode. I have the same version of SME on both.
# uname -a
Linux wolverine 2.4.20-18.7 #1 Thu May 29 08:32:50 EDT 2003 i686 unknown
Both sides show IPsec running.
The side with the static IP shows
[root@cpsremote root]# ipsec verify
Checking your system to see if IPsec got installed and started correctly
Version check and ipsec on-path [OK]
Checking for KLIPS support in kernel [OK]
Checking for RSA private key (/etc/ipsec.secrets) [OK]
Checking that pluto is running [OK]
DNS checks.
Looking for forward key for cpsremote [OK]
Looking for KEY in reverse map: 154.150.58.164.in-addr.arpa [OK]
Does the machine have at least one non-private address [OK]
[root@cpsremote root]#
The side behind the DSL shows
root@wolverine root]# ipsec verify
Checking your system to see if IPsec got installed and started correctly
Version check and ipsec on-path [OK]
Checking for KLIPS support in kernel [OK]
Checking for RSA private key (/etc/ipsec.secrets) [OK]
Checking that pluto is running [OK]
DNS checks.
Looking for forward key for wolverine [FAILED]
Looking for KEY in reverse map: 93.149.39.162.in-addr.arpa [FAILED]
Does the machine have at least one non-private address [OK]
[root@wolverine root]#
Both sides give me the same information when I do a restart but I can not get any traffic across the vpn.
[root@cpsremote etc]# service ipsec restart
ipsec_setup: Stopping FreeS/WAN IPsec...
ipsec_setup: Starting FreeS/WAN IPsec 1.99...
ipsec_setup: Using /lib/modules/2.4.20-18.7/kernel/net/ipsec/ipsec.o
[root@cpsremote etc]#
Have tried about every connedtion and option. I have tried it with only ip, host name, and can not seem to get it to work. Anyone got this to work yet. I see a lot of older ones not 6.0 trying with a dhcp ip address.
Tim Taylor
NOT TOOL TIME