Koozali.org formerly Contribs.org

"Local networks" in SME not working......

evikali

"Local networks" in SME not working......
« on: December 09, 2004, 09:04:47 PM »
I believe there might be a problem with how the sme server is controlling which network are allowed to access the server if connected through a vpn connection. The sme server does not supply the vpn tunnel, it´s supplied by a D-Link 804hv router.

I cannot connect to the servers ibays from an vpn tunnel, but there is no problem when the client has an IP that is on the local network.

Has anyone experienced the same ?

guest22

"Local networks" in SME not working......
« Reply #1 on: December 09, 2004, 09:20:08 PM »
can you ping the SME Server from the client through the tunnel ?

evikali

"Local networks" in SME not working......
« Reply #2 on: December 09, 2004, 09:37:08 PM »
Yes I can easily ping the servers ip.
I would like to make a link to one of the servers ibays, so the client can access the folder. I try to use:
net use x: \\"server ip"\"folder name" "password" /user:"username"

"net use" just reply that the network is not available.

guest22

"Local networks" in SME not working......
« Reply #3 on: December 09, 2004, 10:06:03 PM »
can you add the i-bay via windows network places on a client?

evikali

"Local networks" in SME not working......
« Reply #4 on: December 09, 2004, 10:08:32 PM »
no, i can not see the ibays via windows network neighbourhood

Offline Knuddi

  • *
  • 532
    • http://www.smeoptimizer.com
"Local networks" in SME not working......
« Reply #5 on: December 09, 2004, 10:11:29 PM »
and which IP range do you get from the D-Link router? Did you add this range (if different from the eth0 range) in local networks?

evikali

"Local networks" in SME not working......
« Reply #6 on: December 09, 2004, 10:15:57 PM »
yes i added the network address range 192.168.11.0 which i am getting from the d-link router,
when i added this network range under local networks, i added it with the ip of my router, which is 192.168.10.1
Is that the correct way to do it ?

Offline Knuddi

  • *
  • 532
    • http://www.smeoptimizer.com
"Local networks" in SME not working......
« Reply #7 on: December 09, 2004, 10:21:31 PM »
Yes, that should be the right way. Try to type "route" in the shell and post it - maybe something didn't go right. Are you "just" trying to access a single SME box via VPN and is it running server or server-gateway?

evikali

"Local networks" in SME not working......
« Reply #8 on: December 09, 2004, 10:30:42 PM »
i will post the output of "route" tomorrow.
The server is a "server-only" and yes i am just trying to access a single sme box

evikali

Re: Route
« Reply #9 on: December 13, 2004, 08:49:56 AM »
Hi there, sorry for the delay, here is the output from "route":

[root@webserver root]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.11.0    pc-00001.lisbje 255.255.255.255 UGH   0      0        0 eth0
1x0.225.10.xxx  pc-00001.lisbje 255.255.255.248 UG    0      0        0 eth0
1x0.225.11.xxx  pc-00001.lisbje 255.255.255.248 UG    0      0        0 eth0
192.168.2.0     pc-00001.lisbje 255.255.255.0   UG    0      0        0 eth0
192.168.10.0    *               255.255.255.0   U     0      0        0 eth0
192.168.254.0   pc-00001.lisbje 255.255.255.0   UG    0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
default         pc-00001.lisbje 0.0.0.0         UG    0      0        0 eth0
[root@webserver root]#

evikali

"Local networks" in SME not working......
« Reply #10 on: December 14, 2004, 09:46:34 AM »
Anyone with good ideas why my vpn clients can not see the ibays of the sme, even though the ip adresses of the clients are allowed under "local networks" of the sme ???

please help  :-D