Here is the log file after adding debug option and without sync option:
I have a LCP timeout...
Feb 11 21:48:15 e-smith atalkd[1257]: zip_getnetinfo for eth0
Feb 11 21:48:20 e-smith PAM_unix[1303]: (login) session opened for user root by LOGIN(uid=0)
Feb 11 21:48:20 e-smith -- root[1303]: ROOT LOGIN ON tty2
Feb 11 21:48:23 e-smith diald[683]: Calling site 0.0.0.0
Feb 11 21:48:24 e-smith chat[1333]: abort on (BUSY)
Feb 11 21:48:24 e-smith chat[1333]: abort on (ERROR)
Feb 11 21:48:24 e-smith chat[1333]: abort on (NO CARRIER)
Feb 11 21:48:24 e-smith chat[1333]: abort on (NO DIALTONE)
Feb 11 21:48:24 e-smith chat[1333]: abort on (Invalid Login)
Feb 11 21:48:24 e-smith chat[1333]: abort on (Login incorrect)
Feb 11 21:48:24 e-smith chat[1333]: report (CONNECT)
Feb 11 21:48:24 e-smith chat[1333]: send (ATZ^M)
Feb 11 21:48:24 e-smith chat[1333]: expect (OK)
Feb 11 21:48:24 e-smith chat[1333]: ATZ^M^M
Feb 11 21:48:24 e-smith chat[1333]: OK
Feb 11 21:48:24 e-smith chat[1333]: -- got it
Feb 11 21:48:24 e-smith chat[1333]: send (ATL0M0^M)
Feb 11 21:48:24 e-smith chat[1333]: expect (OK)
Feb 11 21:48:24 e-smith chat[1333]: ^M
Feb 11 21:48:24 e-smith chat[1333]: ATL0M0^M^M
Feb 11 21:48:24 e-smith chat[1333]: OK
Feb 11 21:48:24 e-smith chat[1333]: -- got it
Feb 11 21:48:24 e-smith chat[1333]: send (ATS14=3&EXXXXXX&B512^M)
Feb 11 21:48:25 e-smith chat[1333]: expect (OK)
Feb 11 21:48:25 e-smith chat[1333]: ^M
Feb 11 21:48:25 e-smith chat[1333]: ATS14=3&EXXXXX&B512^M^M
Feb 11 21:48:25 e-smith chat[1333]: OK
Feb 11 21:48:25 e-smith chat[1333]: -- got it
Feb 11 21:48:25 e-smith chat[1333]: send (ATDT0860922000^M)
Feb 11 21:48:25 e-smith atalkd[1257]: config for no router
Feb 11 21:48:25 e-smith chat[1333]: expect (CONNECT)
Feb 11 21:48:25 e-smith chat[1333]: ^M
Feb 11 21:48:26 e-smith atalkd[1257]: ready 0/0/0
Feb 11 21:48:26 e-smith atalk: atalkd startup succeeded
Feb 11 21:48:27 e-smith chat[1333]: ATDT0860922000^M^M
Feb 11 21:48:27 e-smith chat[1333]: CONNECT
Feb 11 21:48:27 e-smith chat[1333]: -- got it
Feb 11 21:48:27 e-smith diald[683]: connector: chat: Feb 11 21:48:27 CONNECT 64000/HDLC
Feb 11 21:48:27 e-smith diald[683]: Connected to site 0.0.0.0
Feb 11 21:48:27 e-smith diald[683]: Running pppd (pid = 1338).
Feb 11 21:48:27 e-smith diald[1338]: Running pppd: /usr/sbin/pppd -defaultroute -detach modem crtscts mtu 1500 mru 1524 name eric.lenezet debug noauth noipdefault ipparam diald
Feb 11 21:48:27 e-smith pppd[1338]: pppd 2.4.0 started by root, uid 0
Feb 11 21:48:27 e-smith pppd[1338]: Using interface ppp0
Feb 11 21:48:27 e-smith pppd[1338]: Connect: ppp0 <--> /dev/ttyI0
Feb 11 21:48:27 e-smith pppd[1338]: sent [LCP ConfReq id=0x1
]
Feb 11 21:48:38 e-smith atalk: papd startup succeeded
Feb 11 21:48:38 e-smith papd[1348]: restart (1.4b2+asun2.1.3)
Feb 11 21:48:39 e-smith atalk: afpd startup succeeded
Feb 11 21:48:42 e-smith last message repeated 5 times
Feb 11 21:48:45 e-smith afpd[1358]: e-smith-server:AFPServer@* started on 65280.172:254 (1.4b2+asun2.1.3)
Feb 11 21:48:45 e-smith afpd[1358]: ASIP started on 192.168.1.1:548(2) (1.4b2+asun2.1.3)
Feb 11 21:48:45 e-smith pppd[1338]: sent [LCP ConfReq id=0x1 ]
Feb 11 21:48:54 e-smith last message repeated 3 times
Feb 11 21:48:57 e-smith pppd[1338]: LCP: timeout sending Config-Requests
Feb 11 21:48:57 e-smith pppd[1338]: Connection terminated.
Feb 11 21:48:57 e-smith pppd[1338]: Exit.
Feb 11 21:48:57 e-smith diald[683]: start sl0: SIOCSIFMTU: Invalid argument
Feb 11 21:48:57 e-smith diald[683]: stop ppp0: RTNETLINK answers: No such process
Feb 11 21:48:57 e-smith kernel: ppp: ppp0 not active
Feb 11 21:48:57 e-smith diald[683]: stop ppp0: SIOCSIFFLAGS: No such device or address
Feb 11 21:48:57 e-smith diald[683]: Disconnected. Call duration 30 seconds.
If someone can help me ;o)
NeLNeL wrote:
>
> Hello,
>
> I would like to know why with e-smith 4.1.2 i can't use eicon
> diva pci isdn card and with sme5.1.2 it work fine... Did
> someone can explain to me what's wrong with 4.1.2 and fine
> with 5.1.2? I have alway the same message on 4.1.2: sl0:
> SIOSIFMTU: invalid argument ...where can i change it? I would
> like to understand before passing on 5.1.2 ;o)
> Thanks.
> NeL