Topic: usb nic

[GPete]

from the message log:
kernel: usb 5-1: new full speed USB device using address 2
kernel: drivers/usb/net/pegasus.c: v0.5.12 (2003/06/06):Pegasus/Pegasus II USB Ethernet driver
kernel: drivers/usb/net/pegasus.c: intr interval will be changed from 1ms to 128ms
kernel: drivers/usb/net/pegasus.c: setup Pegasus II specific registers
kernel: divert: allocating divert_blk for eth1
kernel: eth1: ADMtek ADM8511 "Pegasus II" USB Ethernet
kernel: usbcore: registered new driver pegasus

But when I go to configure the server it says I only have one nic.
what am I missing?

[CharlieBrady]

But when I go to configure the server it says I only have one nic.
what am I missing?

SME server has never had any support for USB NICs, and only supports PCI NICs.

[GPete]

I know that you are the expert, but...?
  http://forums.contribs.org/index.php?topic=38002.0

am I in the wrong place?

[CharlieBrady]

I know that you are the expert, but...?
  http://forums.contribs.org/index.php?topic=38002.0

Yes, it can be made to work if you are prepared to do some tricky customisation. My statements were true - SME server only supports PCI NICs.

am I in the wrong place?

Yes, if you want help with customisation, you should use a different forum. This one is:

  SME Server 7.x

  Discussion of the use of *ONLY* the components and features included on the SME Server 7.x CD.