Hi,
http://cd-utils.sourceforge.net/support.php
you will need to enable SSH with root access and use Putty or something to login to the server. Download these files:
cdrtools-1.10-11.src.rpm
cd-utils-0.3.2-1.noarch.rpm
e-smith-cd-utils-0.2.1-1.noarch.rpm
mkisofs-1.10-11.i386.rpm
copy the files to a floppy disk or cdrw and login to the server. Mount the drive and change to the device to see the files.
then from the root use the
rpm -Uvh cdrtools-1.10-11.src.rpm
rpm -Uvh cd-utils-0.3.2-1.noarch.rpm
rpm -Uvh e-smith-cd-utils-0.2.1-1.noarch.rpm
rpm -Uvh mkisofs-1.10-11.i386.rpm
then from the root prompt enter the command:
/etc/e-smith/events/actions/navigation-conf
configure the paths and you're up and burning from the administration panel
curtis =)
I did all that and I can't get my DVD to write. Here's the /tmp/cdbackup.err:
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
/usr/bin/dvdrecord: Input/output error. reserve track: scsi sendcmd: no error
CDB: 53 00 00 00 00 00 00 01 2C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 53 00 00 0F 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/dvdrecord: Cannot open new session.
Any ideas?
Thanks.