Topic: In need of some help with Opsi installation on SME8

[jester]

Anyone tried to install Opsi on SME( and still got some notes lying around?!

Keep getting PAM errors i can't figure out (... so if you got some PAM knowledge...). If i get this working i'll put up a howto in the wiki.


Thanx!
Jester.

[fpausp]

Hi,

Not on SME just debian lenny but it would be cool on sme8. Can you share the steps you have done ?

regards
fpausp

[fpausp]

Hi,

Do you mean this error:

Code: [Select]

[5] [May 16 22:31:50] Application 'opsi config editor 4.0.1.8' on client '192.168.1.1' supplied non existing session id: ZG6wdruGe1DQ83kbEOXdVJ0WnxrM1pfm (Worker.py|393)
[5] [May 16 22:31:50] Authorization request from adminuser@192.168.1.1 (application: opsi config editor 4.0.1.8) (workers.py|184)
[5] [May 16 22:31:50] Session 'AUqiEPOguQt0q1cRjAGNklRNYJID7HFC' from ip '192.168.1.1', application 'opsi config editor 4.0.1.8' deleted (Session.py|207)
[2] [May 16 22:31:50] Traceback: (Logger.py|721)
[2] [May 16 22:31:50]      line 282 in '_errback' in file '/usr/lib/python2.4/site-packages/OPSI/Service/Worker.py' (Logger.py|721)
[2] [May 16 22:31:50]      line 328 in '_runCallbacks' in file '/usr/lib/python2.4/site-packages/twisted/internet/defer.py' (Logger.py|721)
[2] [May 16 22:31:50]      line 227 in '_authenticate' in file '/usr/lib/python2.4/site-packages/opsiconfd/workers.py' (Logger.py|721)
[2] [May 16 22:31:50]      ==>>> Opsi authentication error: Forbidden: Backend authentication error: Backend authentication error: PAM authentication failed for user 'adminuser': ('Authentication failure', 7) (Worker.py|289)
[3] [May 16 22:31:50] 22 authentication failures from '192.168.1.1' in a row, waiting 60 seconds to prevent flooding (workers.py|79)

I tried to install opsi 4.0.1 with:

Code: [Select]

OPSI 4.0.1 on sme8


# Set the opsi Repository:
/sbin/e-smith/db yum_repositories set opsi4 repository \
Name 'CentOS $releasever - $basearch - opsi4.0' \
BaseURL 'http://download.opensuse.org/repositories/home:/uibmz:/opsi:/opsi40/CentOS_CentOS-5/' \
EnableGroups no \
GPGCheck no \
GPGKey http://download.opensuse.org/repositories/home:/uibmz:/opsi:/opsi40/CentOS_CentOS-5/repodata/repomd.xml.key \
Visible no \
status disabled

signal-event yum-modify


# If you have tftp-server installed remove it with:
yum remove tftp-server


# Install opsi:
yum makecache
yum install opsi-depotserver opsi-configed --enablerepo=opsi4
/etc/init.d/opsiconfd restart
/etc/init.d/opsipxeconfd restart
yum install p7zip p7zip-plugins cabextract --enablerepo=opsi4
yum update --enablerepo=opsi4


# Init opsi-server:
opsi-setup --init-current-config
opsi-setup --set-rights
/etc/init.d/opsiconfd restart
/etc/init.d/opsipxeconfd restart


# Set Password:
opsi-admin -d task setPcpatchPassword
Password: xxxxxxxxxxxxxx


#
useradd -m -s /bin/bash adminuser
Enter new UNIX password: xxxxxxxxxxxxxx
Retype new UNIX password: xxxxxxxxxxxxxx

smbpasswd -a adminuser
New SMB password: xxxxxxxxxxxxxx
Retype new SMB password: xxxxxxxxxxxxxx


# Add adminuser to Group opsiadmin and pcpatch:
usermod -a -G opsiadmin adminuser
getent group opsiadmin

usermod -a -G pcpatch adminuser
getent group pcpatch


# Get opsi-product-pakets:
opsi-product-updater -i -vv


# Startscript opsiconfd:
chmod 755 /etc/rc.d/init.d/opsiconfd
ln -s /etc/rc.d/init.d/opsiconfd /etc/rc.d/rc7.d/S98opsiconfd
ln -s /etc/rc.d/init.d/opsiconfd /etc/rc.d/rc6.d/K02opsiconfd
ln -s /etc/rc.d/init.d/opsiconfd /etc/rc.d/rc2.d/K02opsiconfd
ln -s /etc/rc.d/init.d/opsiconfd /etc/rc.d/rc1.d/K02opsiconfd
ln -s /etc/rc.d/init.d/opsiconfd /etc/rc.d/rc0.d/K02opsiconfd


# Startscript opsipxeconfd:
chmod 755 /etc/rc.d/init.d/opsipxeconfd
ln -s /etc/rc.d/init.d/opsipxeconfd /etc/rc.d/rc7.d/S98opsipxeconfd
ln -s /etc/rc.d/init.d/opsipxeconfd /etc/rc.d/rc6.d/K02opsipxeconfd
ln -s /etc/rc.d/init.d/opsipxeconfd /etc/rc.d/rc2.d/K02opsipxeconfd
ln -s /etc/rc.d/init.d/opsipxeconfd /etc/rc.d/rc1.d/K02opsipxeconfd
ln -s /etc/rc.d/init.d/opsipxeconfd /etc/rc.d/rc0.d/K02opsipxeconfd


# Open configed:
https://<opsidepotserver>:4447/configed


I found this in the opsi-forum (german):
https://forum.opsi.org/viewtopic.php?f=7&t=2267

Maybe someone can help us ?

[fpausp]

OK, I think I got it. Here is a quick and dirty OPSI-SME-PAM workaround:

Code: [Select]

# Quick and Dirty PAM Workaround
nano /usr/lib/python2.4/site-packages/OPSI/Backend/BackendManager.py

change the line:
elif (DISTRIBUTOR.lower().find('redhat') != -1) or (DISTRIBUTOR.lower().find('centos') != -1) or (DISTRIBUTOR.lower().find('scientificsl') != -1):

to:
elif (DISTRIBUTOR.lower().find('redhat') != -1) or (DISTRIBUTOR.lower().find('centos') != -1) or (DISTRIBUTOR.lower().find('sme') != -1):


Now I am able to login
Cheers!

[cactus]

Code: [Select]

# Quick and Dirty PAM Workaround
nano /usr/lib/python2.4/site-packages/OPSI/Backend/BackendManager.py

change the line:
elif (DISTRIBUTOR.lower().find('redhat') != -1) or (DISTRIBUTOR.lower().find('centos') != -1) or (DISTRIBUTOR.lower().find('scientificsl') != -1):

to:
elif (DISTRIBUTOR.lower().find('redhat') != -1) or (DISTRIBUTOR.lower().find('centos') != -1) or (DISTRIBUTOR.lower().find('sme') != -1):



Although not a problem in you case (SME Server), it is common practice to not replace a value you do not need with one you do need, but to just add the one you need, so it read like this:

Code: [Select]

elif (DISTRIBUTOR.lower().find('redhat') != -1) or (DISTRIBUTOR.lower().find('centos') != -1) or (DISTRIBUTOR.lower().find('scientificsl') != -1) or (DISTRIBUTOR.lower().find('sme') != -1):

[fpausp]

@ cactus

Although not a problem in you case (SME Server), it is common practice to not replace a value you do not need with one you do need, but to just add the one you need, so it read like this: ...

Yes, of course.


@ jester

Keep getting PAM errors i can't figure out (... so if you got some PAM knowledge...). If i get this working i'll put up a howto in the wiki.

That would be nice, are you ready to make a howto for the wiki ?

[jester]

Sorry guys,
Just became father (2nd) this week and it didn't all go well at first (much better now though) so just found some time to quickly check my mail and saw your replies.

@fpausp: That was the same error i was running into. Great you found the root of the problem. I don't think i'll get round to testing your findings and jotting down a wiki page for another week or two.

@jonathan: thanx for your input.


Regards,
Jester.

[haliparotin]

What the OPSI? and what the purpose of OPSI? OPSI can help for business? thank you..

[fpausp]

@ jester

Just became father (2nd) this week and it didn't all go well at first (much better now though)...

Congratulation, don´t worry about the wiki, we have time.

@
haliparotin

What the OPSI? and what the purpose of OPSI? OPSI can help for business? thank you..

http://www.opsi.org/



regards

[jester]

For those who would like to TEST: I've got some preliminary stuff on my user-page but i'm a bit reluctant to put this up because is see no proper/clean way of uninstalling Opsi. Quite a load of packages are installed and a few are updated and, especially over time (when some more are updated through the opsi repo) it will be very hard to remove. So if you're installing this as a dedicated box/virtual machine i guess it would be ok, but otherwise...

I wish the yum package would be a bit more recent, then it would be less trouble with the 'history' option!


Best,
Jester.

[Jáder]

Jester

I'm trying to follow your notes on personal page and got a dependency error: python-rrdtool:

Code: [Select]

--> Finished Dependency Resolution
opsiconfd-4.0.1.9-4.1.noarch from opsi4 has depsolving problems
  --> Missing Dependency: python-rrdtool is needed by package opsiconfd-4.0.1.9-4.1.noarch (opsi4)
Error: Missing Dependency: python-rrdtool is needed by package opsiconfd-4.0.1.9-4.1.noarch (opsi4)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
The program package-cleanup is found in the yum-utils package.

I found it here:
ftp://ftp.pbone.net/mirror/ftp.pramberger.at/systems/linux/contrib/rhel5/i386/python-rrdtool-1.4.5-1.el5.pp.i386.rpm

and tried again:
[root@vb-sme8 ~]# yum install opsi-depotserver opsi-configed --enablerepo=opsi4 localinstall python-rrdtool-1.4.5-1.el5.pp.i386.rpm

Code: [Select]

Error: Missing Dependency: librrd.so.4 is needed by package python-rrdtool-1.4.5-1.el5.pp.i386 (/python-rrdtool-1.4.5-1.el5.pp.i386)
 You could try using --skip-broken to work around the problem
 You could try running: package-cleanup --problems
                        package-cleanup --dupes
                        rpm -Va --nofiles --nodigest
The program package-cleanup is found in the yum-utils package.


But apparently  I'm too newbie to know how to install without any help from you! :$
I'm using a virtualbox machine, so we can be on safe side and do a lot of tests!

Regards

Jáder

[jester]

I recently also noticed the new dependency for the latest opsiconfd package... and sadly python-rrdtool brings a LOAD of other dependencies with it. So i've not updated yet myself. If i'm not mistaken enabling the DAG repository satisfies all the dependencies, for adding DAG to SME8:

Code: [Select]

/sbin/e-smith/db yum_repositories set dag repository \
Name 'Dag - EL5' \
BaseURL 'http://apt.sw.be/redhat/el5/en/$basearch/dag' \
EnableGroups no \
GPGCheck yes \
GPGKey http://dag.wieers.com/packages/RPM-GPG-KEY.dag.txt \
Visible no \
Exclude freetype,htop,iptraf,rsync,syslinux \
status disabled
After adding it run:

Code: [Select]

signal-event yum-modify
If you install python-rrdtool separately (en then opsi) you can see what comes with it as dependency:

Code: [Select]

yum install python-rrdtool --enablerepo=dag
If you don't care about the dependencies:

Code: [Select]

yum install opsi-depotserver opsi-configed --enablerepo=opsi4,dag

HTH.

[Jáder]

jester

Install w/o dependencies is not an option: it's a easy way to break things!
I run the install python-rrdtool (yum install python-rrdtool --enablerepo=dag)and got:

Code: [Select]


====================================================================================================
 Package                      Arch           Version                        Repository         Size
====================================================================================================
Installing:
 python-rrdtool               i386           1.4.4-1.el5.rf                 dag                29 k
Installing for dependencies:
 audit-libs-python            i386           1.7.18-2.el5                   base               79 k
 bitstream-vera-fonts         noarch         1.10-7                         base              343 k
 cairo                        i386           1.2.4-5.el5                    base              394 k
 chkfontpath                  i386           1.10.1-1.1                     base               15 k
 fontconfig                   i386           2.4.1-7.el5                    smeos             174 k
 libFS                        i386           1.0.0-3.1                      smeos              30 k
 libX11                       i386           1.0.3-11.el5_7.1               updates           797 k
 libXau                       i386           1.0.1-3.1                      smeos              18 k
 libXdmcp                     i386           1.0.1-2.1                      smeos              19 k
 libXext                      i386           1.0.1-2.1                      smeos              35 k
 libXfont                     i386           1.2.2-1.0.4.el5_7              updates           240 k
 libXft                       i386           2.1.10-1.1                     base               44 k
 libXrender                   i386           0.9.1-3.1                      base               27 k
 libdbi                       i386           0.8.1-2.1                      base               35 k
 libfontenc                   i386           1.0.2-2.2.el5                  smeos              19 k
 libselinux-python            i386           1.33.4-5.7.el5                 base               73 k
 libsemanage                  i386           1.9.1-4.4.el5                  base              137 k
 lua                          i386           5.1.4-2.el5.rf                 dag               242 k
 pango                        i386           1.14.9-8.el5.centos.3          smeextras         334 k
 perl-rrdtool                 i386           1.4.4-1.el5.rf                 dag                52 k
 policycoreutils              i386           1.33.12-14.8.el5               base              619 k
 rrdtool                      i386           1.4.4-1.el5.rf                 dag               895 k
 ruby                         i386           1.8.5-19.el5_6.1               base              275 k
 ruby-libs                    i386           1.8.5-19.el5_6.1               base              1.6 M
 ttmkfdir                     i386           3.0.9-23.el5                   base               46 k
 xorg-x11-filesystem          noarch         7.1-2.fc6                      smeos             5.4 k
 xorg-x11-font-utils          i386           1:7.1-3                        base               76 k
 xorg-x11-fonts-Type1         noarch         7.1-2.1.el5                    base              1.5 M
 xorg-x11-xfs                 i386           1:1.0.2-5.el5_6.1              base               69 k

Transaction Summary
====================================================================================================
Install      30 Package(s)
Upgrade       0 Package(s)

Total download size: 8.1 M

wow... 30 packages!
anyways, I'm moving forward... it's just an virtualbox machine

More news in few minutes.
update...

Code: [Select]

====================================================================================================
 Package                         Arch            Version                       Repository      Size
====================================================================================================
Installing:
 opsi-configed                   noarch          4.0.1.12-1.1                  opsi4          1.9 M
 opsi-depotserver                noarch          4.0.1.10-1.1                  opsi4           28 k
Installing for dependencies:
 duplicity                       i386            0.6.08b-6.1                   opsi4          401 k
 gnupg2                          i386            2.0.10-3.el5_5.1              base           2.6 M
 java-1_6_0-sun                  i386            1.6.0.u20-7.1                 opsi4           33 M
 jpackage-utils                  noarch          1.7.3-1jpp.2.el5              base            61 k
 libXi                           i386            1.0.1-4.el5_4                 base            25 k
 libXtst                         i386            1.0.1-3.1                     base            15 k
 libksba                         i386            1.0.5-2.el5                   base           115 k
 libnewt0_52                     i386            0.52.11-13.1                  opsi4           96 k
 librsync                        i386            0.9.7-176.1                   opsi4           96 k
 lshw                            i386            B.02.14-4.1                   opsi4          1.3 M
 opsi-atftp                      i386            0.7.dfsg-8.1                  opsi4           30 k
 opsi-linux-bootimage            noarch          20110829-1.2                  opsi4           67 M
 opsi-utils                      noarch          4.0.1.14-1.1                  opsi4           61 k
 opsiconfd                       noarch          4.0.1.9-4.1                   opsi4           73 k
 opsipxeconfd                    noarch          4.0.1.4-1.1                   opsi4           14 k
 pax                             i386            3.4-2.el5_4                   base            63 k
 pinentry                        i386            0.7.3-3.el5                   base            60 k
 pth                             i386            2.0.7-6.el5                   base            90 k
 pyOpenSSL                       i386            0.6-2.el5                     base           128 k
 python-GnuPG-Interface          i386            0.3.2-4.1                     opsi4           25 k
 python-crypto                   i386            2.1.0-5.1                     opsi4          351 k
 python-ldap                     i386            2.2.0-2.1                     base           122 k
 python-ldaptor                  i386            0.0.43-12.1                   opsi4          153 k
 python-magic                    i386            5.04-6.1                      opsi4           14 k
 python-mysql                    i386            1.2.2-92.1                    opsi4          121 k
 python-newt                     i386            0.52.11-13.1                  opsi4           45 k
 python-opsi                     noarch          4.0.1.28-1.1                  opsi4          1.3 M
 python-pam                      i386            0.5.0-76.1                    opsi4           29 k
 python-pexpect                  i386            2.3-31.1                      opsi4          317 k
 python-pyparsing                i386            1.5.6-13.1                    opsi4          110 k
 python-serial                   noarch          2.4-11.1                      opsi4           66 k
 python-sqlalchemy               i386            0.6.6-17.3                    opsi4          1.5 M
 python-twisted                  i386            8.2.0-13.1                    opsi4          4.3 M
 python-zopeinterface            i386            3.3.0-114.1                   opsi4          153 k
 redhat-lsb                      i386            4.0-2.1.4.el5                 base            25 k
 redhat-rpm-config               noarch          8.0.45-32.el5.centos          base            54 k
 xinetd                          i386            2:2.3.14-13.el5               base           125 k
 zsync                           i386            0.6.1-6.1                     opsi4          111 k
Updating for dependencies:
 newt                            i386            0.52.11-13.1                  opsi4           52 k

Transaction Summary
====================================================================================================
Install      40 Package(s)
Upgrade       1 Package(s)

Total download size: 116 M
Is this ok [y/N]: y

Jáder

[Jáder]

got some errors at install, see after SHA1 Fingerprint line:

Code: [Select]

(...)
  Installing     : opsiconfd                                                                  37/42
Generating a 1024 bit RSA private key
.................................++++++
...........++++++
writing new private key to '/etc/opsi/opsiconfd.pem'
-----
1024 semi-random bytes loaded
Generating DH parameters, 512 bit long safe prime, generator 2
This is going to take a long time
.......................++*++*++*++*++*++*
subject= /C=DE/ST=RP/L=Mainz/O=uib GmbH/CN=vb-sme8.marasca.net.br/emailAddress=root@vb-sme8.marasca.net.br
notBefore=Oct 18 10:21:18 2011 GMT
notAfter=Jul 14 10:21:18 2014 GMT
SHA1 Fingerprint=7F:8E:53:D2:89:55:E6:92:62:59:B7:59:64:B0:1D:E3:8E:E2:BC:4A
Starting opsi config service..su: warning: cannot change directory to /var/lib/opsi: Permission denied
-bash: /var/lib/opsi/.bash_profile: Permission denied
..........   (failed).
warning: user opsiconfd does not exist - using root
  Installing     : opsi-linux-bootimage                                                       38/42
  Installing     : opsipxeconfd                                                               39/42
Starting opsi pxe configuration service...   (done).
  Installing     : opsi-utils                                                                 40/42
  Installing     : opsi-depotserver                                                           41/42
[5] [Oct 18 08:21:38] Configuring samba (opsi-setup|132)
[5] [Oct 18 08:21:38] Getting current system config (opsi-setup|66)
[5] [Oct 18 08:21:38] System information: (opsi-setup|116)
[5] [Oct 18 08:21:38]    distributor  : SMEServer (opsi-setup|117)
[5] [Oct 18 08:21:38]    distribution : SME Server release 8.0beta6 (opsi-setup|118)
[5] [Oct 18 08:21:38]    ip address   : 192.168.13.2 (opsi-setup|119)
[5] [Oct 18 08:21:38]    netmask      : 255.255.255.0 (opsi-setup|120)
[5] [Oct 18 08:21:38]    subnet       : 192.168.13.0 (opsi-setup|121)
[5] [Oct 18 08:21:38]    broadcast    : 192.168.13.255 (opsi-setup|122)
[5] [Oct 18 08:21:38]    fqdn         : vb-sme8.marasca.net.br (opsi-setup|123)
[5] [Oct 18 08:21:38]    hostname     : vb-sme8 (opsi-setup|124)
[5] [Oct 18 08:21:38]    domain       : marasca.net.br (opsi-setup|125)
[5] [Oct 18 08:21:38]    win domain   : LINUX (opsi-setup|126)
[5] [Oct 18 08:21:38]    Adding share [opt_pcbin] (opsi-setup|160)
[5] [Oct 18 08:21:38]    Adding share [opsi_depot] (opsi-setup|174)
[5] [Oct 18 08:21:38]    Adding share [opsi_config] (opsi-setup|194)
[5] [Oct 18 08:21:38]    Adding share [opsi_workbench] (opsi-setup|205)
[5] [Oct 18 08:21:38]    Creating backup of /etc/samba/smb.conf (opsi-setup|221)
[5] [Oct 18 08:21:38]    Writing new smb.conf (opsi-setup|224)
[5] [Oct 18 08:21:38]    Reloading samba (opsi-setup|229)
[5] [Oct 18 08:21:38] Configuring dhcpd (opsi-setup|237)
[5] [Oct 18 08:21:38]       No groups found, adding group (opsi-setup|270)
[5] [Oct 18 08:21:38]    next-server set to 192.168.13.2 (opsi-setup|290)
[5] [Oct 18 08:21:38]          filename set to linux/pxelinux.0 (opsi-setup|304)
[5] [Oct 18 08:21:38]    Creating backup of /etc/dhcpd.conf (opsi-setup|307)
[5] [Oct 18 08:21:38]    Writing new /etc/dhcpd.conf (opsi-setup|310)
[5] [Oct 18 08:21:38]    Restarting dhcpd (opsi-setup|313)
[5] [Oct 18 08:21:39] Configuring sudoers (opsi-setup|319)
[5] [Oct 18 08:21:39]    Creating backup of /etc/sudoers (opsi-setup|330)
[5] [Oct 18 08:21:39]    Adding sudoers entry for dhcpd restart (opsi-setup|333)
[5] [Oct 18 08:21:39]    Writing new /etc/sudoers (opsi-setup|338)
[5] [Oct 18 08:21:39] Creating base path: '/var/lib/opsi/config' (File.py|215)
[5] [Oct 18 08:21:39] Creating config server 'vb-sme8.marasca.net.br' (opsi-setup|2448)
[5] [Oct 18 08:21:39] Creating base path: '/var/lib/opsi/config' (File.py|215)
[5] [Oct 18 08:21:39] Configuring client user pcpatch (opsi-setup|349)
[5] [Oct 18 08:21:39]    Creating RSA private key for user pcpatch in '/var/lib/opsi/.ssh/id_rsa' (opsi-setup|363)
[5] [Oct 18 08:21:41] Setting rights (opsi-setup|412)
[5] [Oct 18 08:21:41] Setting rights on directory '/var/lib/opsi/.ssh' (opsi-setup|493)
[5] [Oct 18 08:21:44] Setting rights (opsi-setup|412)
[5] [Oct 18 08:21:44] Getting current system config (opsi-setup|66)
[5] [Oct 18 08:21:44] System information: (opsi-setup|116)
[5] [Oct 18 08:21:44]    distributor  : SMEServer (opsi-setup|117)
[5] [Oct 18 08:21:44]    distribution : SME Server release 8.0beta6 (opsi-setup|118)
[5] [Oct 18 08:21:44]    ip address   : 192.168.13.2 (opsi-setup|119)
[5] [Oct 18 08:21:44]    netmask      : 255.255.255.0 (opsi-setup|120)
[5] [Oct 18 08:21:44]    subnet       : 192.168.13.0 (opsi-setup|121)
[5] [Oct 18 08:21:44]    broadcast    : 192.168.13.255 (opsi-setup|122)
[5] [Oct 18 08:21:44]    fqdn         : vb-sme8.marasca.net.br (opsi-setup|123)
[5] [Oct 18 08:21:44]    hostname     : vb-sme8 (opsi-setup|124)
[5] [Oct 18 08:21:44]    domain       : marasca.net.br (opsi-setup|125)
[5] [Oct 18 08:21:44]    win domain   : LINUX (opsi-setup|126)
[5] [Oct 18 08:21:45] Setting rights on directory '/tftpboot/linux' (opsi-setup|493)
[5] [Oct 18 08:21:45] Setting rights on directory '/home/opsiproducts' (opsi-setup|493)
[5] [Oct 18 08:21:45] Setting rights on directory '/var/log/opsi' (opsi-setup|493)
[5] [Oct 18 08:21:45] Setting rights on directory '/etc/opsi' (opsi-setup|493)
[5] [Oct 18 08:21:45] Setting rights on directory '/var/lib/opsi' (opsi-setup|493)
[5] [Oct 18 08:21:45] Setting rights on directory '/var/lib/opsi/depot' (opsi-setup|493)
  Cleanup        : newt                                                                       42/42

Installed:
  opsi-configed.noarch 0:4.0.1.12-1.1             opsi-depotserver.noarch 0:4.0.1.10-1.1           

Dependency Installed:
  duplicity.i386 0:0.6.08b-6.1               gnupg2.i386 0:2.0.10-3.el5_5.1                       
  java-1_6_0-sun.i386 0:1.6.0.u20-7.1        jpackage-utils.noarch 0:1.7.3-1jpp.2.el5             
  libXi.i386 0:1.0.1-4.el5_4                 libXtst.i386 0:1.0.1-3.1                             
  libksba.i386 0:1.0.5-2.el5                 libnewt0_52.i386 0:0.52.11-13.1                       
  librsync.i386 0:0.9.7-176.1                lshw.i386 0:B.02.14-4.1                               
  opsi-atftp.i386 0:0.7.dfsg-8.1             opsi-linux-bootimage.noarch 0:20110829-1.2           
  opsi-utils.noarch 0:4.0.1.14-1.1           opsiconfd.noarch 0:4.0.1.9-4.1                       
  opsipxeconfd.noarch 0:4.0.1.4-1.1          pax.i386 0:3.4-2.el5_4                               
  pinentry.i386 0:0.7.3-3.el5                pth.i386 0:2.0.7-6.el5                               
  pyOpenSSL.i386 0:0.6-2.el5                 python-GnuPG-Interface.i386 0:0.3.2-4.1               
  python-crypto.i386 0:2.1.0-5.1             python-ldap.i386 0:2.2.0-2.1                         
  python-ldaptor.i386 0:0.0.43-12.1          python-magic.i386 0:5.04-6.1                         
  python-mysql.i386 0:1.2.2-92.1             python-newt.i386 0:0.52.11-13.1                       
  python-opsi.noarch 0:4.0.1.28-1.1          python-pam.i386 0:0.5.0-76.1                         
  python-pexpect.i386 0:2.3-31.1             python-pyparsing.i386 0:1.5.6-13.1                   
  python-serial.noarch 0:2.4-11.1            python-sqlalchemy.i386 0:0.6.6-17.3                   
  python-twisted.i386 0:8.2.0-13.1           python-zopeinterface.i386 0:3.3.0-114.1               
  redhat-lsb.i386 0:4.0-2.1.4.el5            redhat-rpm-config.noarch 0:8.0.45-32.el5.centos       
  xinetd.i386 2:2.3.14-13.el5                zsync.i386 0:0.6.1-6.1                               

Dependency Updated:
  newt.i386 0:0.52.11-13.1                                                                         

Complete!

ignoring for now... and moving ahead!

[Jáder]

I'm not sure if I'm in trouble by errors, or by ignorance! :$

I'm trying to start use OPSI... but it's a server, headless, virtualbox... no GUI.
I've tryed to access this URL:

Code: [Select]

httpS://SERVER_IP:4447/configed but got an 404 error

I've tryed to run opsi-configed, but got error "command not found"
I search for opsi-configed, found it a /usr/bin
changed java path (search for it also!):

Code: [Select]

[root@vb-sme8 ~]# cat /usr/bin/opsi-configed
#!/bin/sh

#  java -cp classes:/usr/lib/configed/swingx.jar:/usr/lib/configed/configed.jar de.uib.configed.configed $@
/usr/lib/jvm/java-1.6.0-sun-1.6.0/jre/bin/java -cp classes:/usr/lib/configed/swingx.jar:/usr/lib/configed/configed.jar de.uib.configed.configed $@
but still get errors about X11 ?? :

Code: [Select]

[root@vb-sme8 ~]# opsi-configed
starting de.uib.configed.configed
default charset is ISO-8859-1
server charset is configured as UTF-8
logging directory not yet set
setting Nimbus look&feel
logging directory not yet set
Nimbus look&feel set
logging directory is /root/configed
log level is 3
logging: use /root/configed/configed.log
TEST     -- Tue Oct 18 09:26:51 BRST 2011 --  getLocales: [de, en, es, fr, nl, tr]
TEST     -- Tue Oct 18 09:26:51 BRST 2011 --  selected locale characteristic en
ERROR    -- Tue Oct 18 09:26:51 BRST 2011 --  unhandled java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
ERROR    -- Tue Oct 18 09:26:51 BRST 2011 --  Exception java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
STACK:
     java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:159)
     java.awt.Window.<init>(Window.java:432)
     java.awt.Frame.<init>(Frame.java:403)
     java.awt.Frame.<init>(Frame.java:368)
     javax.swing.SwingUtilities$SharedOwnerFrame.<init>(SwingUtilities.java:1727)
     javax.swing.SwingUtilities.getSharedOwnerFrame(SwingUtilities.java:1804)
     javax.swing.JDialog.<init>(JDialog.java:253)
     de.uib.configed.gui.DPassword.<init>(DPassword.java:114)
     de.uib.configed.gui.DPassword.<init>(DPassword.java:129)
     de.uib.configed.ConfigedMain.login(ConfigedMain.java:1177)
     de.uib.configed.ConfigedMain.init(ConfigedMain.java:340)
     de.uib.configed.ConfigedMain.run(ConfigedMain.java:324)
     de.uib.configed.configed.startWithLocale(configed.java:94)
     de.uib.configed.configed.<init>(configed.java:180)
     de.uib.configed.configed.main(configed.java:552)

 help please!!!