Topic: Hi all i am newbie and have a problem to =)

[Explorer]

Hi all my name is Raul i am installing now sme server 7.4 (is my first sme server installation)

my problem is
i have one dlink router with adsl+ static ip address for internet
i have 1 computer with two net cards
i am conected the two net cards to dlink router

in the instalation first configuration of ip is for the lan net, and the second configuration is for the external net, i kwon my static ip for internet but, i need the gateway and subnet.
i no kwon my gateway and subnet address of my static ip
i can put my local subnet and gateway for the static ip for external network?

=(

help me is my first installation =)

[gmschmitz]

I'm a newbie as well, but I think your gateway should be what ever your IP address but with a .1 so if your ip was 22.222.245.222 your gateway would be 22.222.245.1 and your subnet should be 255.255.255.0.

Hope this helps

[thomasch]

Hi Raul,
Welcome to SMEServer family

There's SME documentation you definitely have to read.
http://wiki.contribs.org/SME_Server:Documentation is the place to start.
There's pictures of basic SMEserver network configuration in chapter 2.

You don't need two ethernet card in your PC unless you want to use your SME server in server-gateway mode (or ethernet bonding but this is off topic).

Your ADSL have two IP address, one internet IP and one LAN IP/subnet (usually 192.168.x.x/255.255.255.0). Use this ADSL LAN IP as gateway of your SME server.


thomas

[Explorer]

thks its all ok now